DM500C stuck at upload completed, waiting for acknowledge sceen

[clotxtreme]

Hi all, I tried flashing my DM500C but I cannot proceed. It is stuck at the following in dreamup..tried different version of dreamup..still the same..how to proceed?

[mtv1]

try a different power supply mate once its 12v 1-2 amp your fine

[clotxtreme]

Sorry I am very new to this..what do you mean by different power supply? How do I do it?

[mtv1]

the power adapter might be faulty usually the one from a modem ie broadband modem will work they are usually 12v 1 amp same as dreambox

i was stuck on a box like that for ages turned out to be the power supply fault

Redirect Notice

[clotxtreme]

Can anyone from SG help me out with this?

[jackliu]

bro mostly your flash chip n memory chip having problem

[clotxtreme]

What do you suggest I do? If change, these parts can be bought in SG? I also don't know how to change

[ypvs125]

What do you suggest I do? If change, these parts can be bought in SG? I also don't know how to change

Are u using the usb adapter? Find a computer with com port to do the flashing as the usb adapter is not that reliable.

[clotxtreme]

Are u using the usb adapter? Find a computer with com port to do the flashing as the usb adapter is not that reliable.

No I am using com port on desktop

[ypvs125]

No I am using com port on desktop

Have u try changing yr ac adapter? If still problem, got to do with flash chip. Is yr box able to boot up?

[clotxtreme]

Have u try changing yr ac adapter? If still problem, got to do with flash chip. Is yr box able to boot up?

My adapter read 12V 2A...My box cannot on/off other than remove power source...basically cannot do anything...anyone willing to meet up with me to help me take a look?

[SGDVB]

First of all... Have you previously backup your previous version of your workable box? If not how about the softcam (scce + keys)?

Reason of asking is that you will needs a working image or the softcam to setup the box later otherwise you will not be able to use the box even if you flash sucessfully.


Sent from my iPhone using Tapatalk

[jackliu]

Erm,i have the parts

[jackliu]

four to five parts need to change

[clotxtreme]

First of all... Have you previously backup your previous version of your workable box? If not how about the softcam (scce + keys)?

Reason of asking is that you will needs a working image or the softcam to setup the box later otherwise you will not be able to use the box even if you flash sucessfully.


Sent from my iPhone using Tapatalk

I have never done anything to the box other than connecting it to watch the program.