Evocamd 2.17c

[shaz4215]

TBH i aint sure,i've got an original 500 from 3 yrs ago,they were notorious for freezing/signal issues.
I've only ever tried an argos booster,no good,no yellow brick in them days so tried an attenuator.
Have you tried tweaking the booster in different combinations.

what do you exactly mean by tweaking it in different combinations?

[Donnie Darko]

The booster has dials/glides to trim the boost gain,put it on the worst channel and try adjusting the dials.
You may end up screwing other channels in your attempt to fix the worse channels.

[Donnie Darko]

I did include a link,seems its been removed,shame......

[Donnie Darko]

Cmon Shaz have you tweaked them dials yet???????

[shaz4215]

Cmon Shaz have you tweaked them dials yet???????

. There is only 1 dial on my signal booster. I have turned it down, turned it up; but the channel freezing still happens.

[b11mmo]

trying to unzip this file it warns that it is corrupt and wont fully extract, is there another version of Evocam? I need it for my dm600
thanks

[Sirus]

YES!... mines is up

What a feeling, never thought Id do it alone

Thanks to all the uber guys here for their assistance in all the noob threads

[shere]

corrupt file

Hi, can anyone please updaload this file again? the one that is postes semms to be corrupt.

Thanks :-)

[Integrale Man]

Hi, can anyone please updaload this file again? the one that is postes semms to be corrupt.

Thanks :-)

I used to try this method without much success!! Best bet is to connect dreambox to the internet and do it through the remote. Piece of cake that way!

[RLSTorrents]

Thanks, my sly one is pixelating, cause of low frequency, this will sort it, hopefully

[pure_jax]

Dont wanna sound a n00b but how do i install this on commando 11?

Please help!

pure_jax

[gizmo.1484]

Dont wanna sound a n00b but how do i install this on commando 11?

Please help!

pure_jax

D/load then transfer to var/bin/emu. After it as transferred then right click on it then scroll down to chmod then left click on it the change to 755 then press ok then reboot your box.

[pure_jax]

ok so i just rename Evocamd_2.17c to Evocamd and overwrite the existing file?

please advise.

pure_jax

[gizmo.1484]

ok so i just rename Evocamd_2.17c to Evocamd and overwrite the existing file?

please advise.

pure_jax

Then transfer to var/bin/emu then change the chmod to 755.

[mr.mojorisin]

looking for some help with my 500c.can anyone point me in the right direction to download some cams.i got evocamd 2.17,latest k3ys etc but channels still locked.maybe some different cams will work.