If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
hi is everyone in ireland having a problem with there 500c ,it started thurs lots of my mates ,same boat, any ideas what the problem is ,thanks in advance
n@l but its effecting everyone with a 500c and has nt seemed to have touched other boxes, i am in dublin ,so i know lots of people with all types of boxes ,just seems that maybe theres something on the way , and been using 500c for over 2 yrs without any problem,until now
i know m8 i'm in tipp have 2 500c no probs as yet unless the fix for nag2 needs tweaking only explanation i can think of i'm using dw image and dk image i didn't have to put on fix i presume you did ?
The freezing only gets triggered on specific channels. If you switch to a channel and the audio is out of sync or picture is glitchy then if you immediately switch to a different channel it won't freeze the DM500C. If you leave it on the glitchy channel it will freeze in 30 or 60secs.
For example always freezes if left on Dave but doesn't freeze if left on RTE or Sky Sports.
Same here, Dave, S*y movies seem to do it most frequently, the Beebs are fine for me as are Rte ! The SNR on all channels is 94-96% so i dont think that could be the problem as was suggested in the other thread!
judt wondering where the K*ys should be in the DK 1.1 image...in DW 2 they used to be in /var/scce or /var/keys in a keylist.txt file but it doesnt show up here, is that normal or is it to do with the hypercam?
is this happing with all image files or is it just d-k 1???
please press the little red THANKS tab
if I helped if not press the green tab to tell me to f**Koff
sometimes life will kick you around , but sooner or later , you realize you`re a warrior , and your stronger than anything life throws your way !!!!!!!!!!!!!!!!!!!!!!
i tried the dw image you posted last night mtv1, i put the hypercam N2 fix in /var/bin along with the 2 other hypercam files there but i couldn't get it going so i switched back to the dk1.1 image so my houemate wouldnt kill me.
What else would you have to do to get the dw image working?
been up all night trying different images all the same,
signal strenth remained strong on all channels 97 39 0
this morning i hooked up a konig booster with all setting at zero
signal dropped to snr 68 increased gain till signal rose to 94 39 0 all channels back on in working order video and audio back in sync no freezing and no problems with the remote
now here's my question i used a booster to reduce my signal should a varible atenuator do the job cheaper
Comment