Configuring a Fresh Image.

[kagon]

GUI telnet client for all Windows platforms:

http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

SNR is Signal to Noise Ratio (http://en.wikipedia.org/wiki/Signal-to-noise_ratio)
AGC is Automatic Gain Control (http://en.wikipedia.org/wiki/Automatic_gain_control)
BER is Bit Error Ratio (http://en.wikipedia.org/wiki/Bit_error_probability)

In general you want SNR to be as high as possible, and BER to be as low as possible. AGC is a bit more variable and depends on the other two values, signal strength, etc.

[MrManUnited]

Can i just say, after a fair few weeks of hunting and reading these posts, ive got my box up and running. thank you so much for the help. now im going to find out a the other cool things you guys have done. THANK YOU

[mm009b]

hi guys glad to see you all so happy with each other cool
ok ive got box working dm600 only thing i cannot do is a auto scan
any help will be appreciated cheers and thanks in advance


keep up the good work !

sorry forgot tw glasgow

[Curious123]

Download cables.xml file from the download section and ftp the file to var/etc folder on your dreambox. Select bruteforce scan and just wait till the scan finish.

[bash]

please help, i have installed a pli image on dreambox and would like to ftp but i cant obtain the address from the dreambox 600. there is no communication or expersetup menu on the jade software? have i flashed wrong software?

[mr.mojorisin]

please help, i have installed a pli image on dreambox and would like to ftp but i cant obtain the address from the dreambox 600. there is no communication or expersetup menu on the jade software? have i flashed wrong software?

aint too sure if i can post this..i copied it from another site

CREDIT FOR THIS GOES TO DIGIDUDE
CREDIT FOR THIS GOES TO DIGIDUDE


Flash your 500/600 in less than 90 seconds
ive now perfected flashing a 500 and 600 in less than 2 mins, and heres how to do it

first make sure youre receiver is connected to your router, now kill the power, hold in the only button on the front of the receiver, and power it on

after about 20 seconds, youll notice the red.green lights are going wierd, this is an actual code that ill explain in a mo, but you can now let go of the button

your receiver has now gone into ###STOP### mode, has been issued an IP and is waiting to be flashed, now watch the lights, have a pen if you need one, and wait for the red and green to be on together

the green light will flash once, then a quick red flash, 9 greens, one red, 2 green, 1 red, 1 green, 1 red, 6 green, 1 red, 8 green, 1 red, (can anyone see where this is going yet )

the receiver has just flashed you some numbers, with a red flash as a marker between them, and its just told you the start of an IP address, 192 168

a long red flash is a zero, so my box now flashed one long red, another long red, 1 green, 1 quick red, one long red, 1 green, i fast red and 2 green

now the red and green come on together, and it starts over again

its just flashed out

192168001012 which translates to the IP 192.168.1.12

and typing this into a firefox window brings up the firmware upgrade screen, where you browse to the image, and 90 seconds later its on the receiver

have fun

CREDIT FOR THIS GOES TO DIGIDUDE
CREDIT FOR THIS GOES TO DIGIDUDE