If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
need help dunno how to use ftp core or flashxp, plus still dunno how to get ip from box
can you please be a bit more specific mate when wanting help,
give as much detail as poss, so we can get it right first time.
What image you using ?
and you need to get familiar with FTP. Its not that hard if you read through the tuts.
You can change the IP on your box, via the remote control.
It has to be within a range of the IP address of your PC,i normally make it 1 above the IP of my PC, also if you have a router, the gateway IP will most likely be 192.168.1.1
menu>set up> expertsetup> communication setup,,,,and your ip should for dreambox is there ,,
<--marvo added 4 Minutes and 44 Seconds later...-->
start> all programmes> command prompt> and type in "ipconfig" into box you should see two similar numbers "192.168.1.1" and "192.168.1.2" try changing your dreambox to
"192.168.1.3"
<--marvo added 1 Minutes and 5 Seconds later...-->
ps ,,check what your numbers are first though,,they could be anything ,,but 192. is usually the first 3 digits
Last edited by marvo; 13 June, 2008, 21:54.
Reason: Automerged Doublepost
Comment