DM600 cli image prob

[alliv]

hi guys, i,m using the cli 600 image. when watching a recording if i switch to the next recording the box restarts and comes back on in tv mode. also if recording and try to switch to one of the other channels on the same transponder the recording stops. anybody have this problem? is there a better image out there for the db 600?

[caveman_nige]

I use the Pli image these days bud, its very stable and has not let me down yet.. Try it,, just remember to backup your files before you you trash what you have...

[satman]

hi guys, i,m using the cli 600 image. when watching a recording if i switch to the next recording the box restarts and comes back on in tv mode. also if recording and try to switch to one of the other channels on the same transponder the recording stops. anybody have this problem? is there a better image out there for the db 600?

Hi,, your issue of it want to stop recording is normal when trying to change channel, even if its on same transponder, to be able to watch another channel on the same transponder whilst recording something you need to be bit more logical..
i will use bbc1 and bbc2 as an example here,,
Say you want to watch bbc1 but record bbc2,,,, be on channel 1,,,, wait until the programme on channel2 is less than a minute from starting that you want to record, go into timers menu and set a timer to pvr record bbc2,, if you timed it right it will just start recording channen2 but will remain on bbc1 for you,,,,

as for the box restarting and going back to tv mode, look in expert setup and see which you have this set to "autoplay in file mode",, enable that and if your watching something and turn off or restart should continue where you left of in file mode. also, when you get to end of first recording, do you press stop and then select the next recording or do you just try jump onto next recording pressing ok?

[Ebro]

Or as Caveman suggests change to the PLi image. It doesn't have that problem. I had the same with the CLI image, it's know fault. PLi is more stable. I can watch one channel and record another (on the same transponder) without having to worry about timings. I can also delete files while still recording something else, with not problems. I could not do that with the CLi image.

[alliv]

I use the Pli image these days bud, its very stable and has not let me down yet.. Try it,, just remember to backup your files before you you trash what you have...

hi caveman, thats one image i have never tried. i might stick it on over the weekend and have a look. thanks m8.

<--alliv added 4 Minutes and 31 Seconds later...-->

Or as Caveman suggests change to the PLi image. It doesn't have that problem. I had the same with the CLI image, it's know fault. PLi is more stable. I can watch one channel and record another (on the same transponder) without having to worry about timings. I can also delete files while still recording something else, with not problems. I could not do that with the CLi image.

thanks ebro i will have a go and let you guys know how i get on.


satman i did as you said {ticked file mode autoplay } and it worked. now can go from one recording to the next with no problems. thanks m8.

[Ebro]

alliv, how about when you delete a file. Do you get the reboot?

[satman]

alliv, how about when you delete a file. Do you get the reboot?

I dont get that on testing here ....

[alliv]

alliv, how about when you delete a file. Do you get the reboot?

no ebro not had that problem. infact its perfect since i ticked autoplay in file mode as satman suggested.