DM600 no transponders during scan

[engagedata]

hi peeps good day to all, ive got a bit of a problem a freind of mine has asked me to look at her dm600 pvr, i done a fash but when i scan it dosent seem to find any transponders, im used to eurovox and i think the dm600 is a bit confuseing maybee something to do with the smoke i had last night ive looked a the forum but dosent seem to help this problem

[alexh]

Sounds like the image you flashed is missing the cables.xml file

[engagedata]

hi there it was the pli jade 3 image tht i flashed i did it with another jade 3 image from another download source also same it cant find any transponders

[smoggie]

as alex said you need to put the cables xml file in, think it goes in var/etc http://www.digital-kaos.co.uk/forums...ables-xml-369/

[alexh]

Are you sure the cable feed is live?

If you can find out the frequency and symbol rate of just one transponder you can perform a manual scan with network scan option selected.

Menu->Setup->Service Searching->Manual Transponder Scan



The frequency & symbol rate settings here are for the region of whoever took this screenshot and almost certainly wont work in your area, but if you can find the settings for your area you'll be in the money. Try to look up your area using this post I have linked to below

http://www.digital-kaos.co.uk/forums/f71/area-code-eurovox-symbol-rate-18032/#post91242

Of the three numbers listed in the above post; The second number is the frequency of the base transponder. The third is the Symbol rate.

For some reason the first digit ("0") of the symbol rate is attached to the end of the transponder frequency

i.e. 666750 6887 = 66675 06887

Try it, let us know if it works.

[engagedata]

hi lads thanks for your help will try will try alexh said l8ters i need to go out for a few hours. also i dont see var keys ect in box

[smoggie]

hi lads thanks for your help will try will try alexh said l8ters i need to go out for a few hours. also i dont see var keys ect in box

you will need to install the keys and probably have to install evocamd too.

[alexh]

Only to decode the channels. Not to scan.