Pli jade dm600pvr 20081001 needed

[loncell]

thanks for that , well im nearly there just gonna try send the bouquets over using "dreamboxedit" but my last question is - in dreamboxedit there's 3 boxes along the bottom satelite - cable - 7025 vers 3 so the bouqs know were there going, , i know i've gota dm600 for cable but do i select sat or cable ? the file structures are diff from a 500c to a dm600pvr.

[lorrebreaker]

Mine are just set to cable:

This is the current settings on my dreambox edit:

Services & Bouquets: /var/tuxbox/config/enigma/
User Bouquet Files: /var/tuxbox/config/enigma/cable/

[loncell]

done n dusted thanks , , i saved all my bouqs from my 500c to pc , , swapped boxes over then fired them across and all sorted.

i've tried to make a backup of the whole image just using dreamUP 1.3.0.2 (DEBUG) but its not seeing the 600c when i power it on ,,,any reason for this ? im def fine with all the IP and com port,

[jim63]

hello every body , i write you from france i buy a dreambox 500s with pli jade image
but there some problemes
1. how the dream can read my smartcard canal+ official,wtich which cccam or software ? when i insert the card in the slot ,i choice canal + then the dream seems to goin wrong ,no response as bug ! i must disconnected and conected !! to see fre channel
what can i do to get out of this probleme
2. can i erase the image and put inside a new one wtih out problem . merci

[Curious123]

hello every body , i write you from france i buy a dreambox 500s with pli jade image
but there some problemes
1. how the dream can read my smartcard canal+ official,wtich which cccam or software ? when i insert the card in the slot ,i choice canal + then the dream seems to goin wrong ,no response as bug ! i must disconnected and conected !! to see fre channel
what can i do to get out of this probleme
2. can i erase the image and put inside a new one wtih out problem . merci

You have posted in the cable section rather than the satellite section as you have the satellite box. A lot of people use CCcam 2.0.9 maybe you could try loading it to see if it would read your card.

[loncell]

i sussed out my connection problem.the RS232 connector to the motherboard inside was on the wrong way !!!.