arnet 700c

[cmcs72]

Hi Does anyone 1 know how to update codes on 1 of these

[bugaloo41]

Manual Key Entry:

Tune to channel 6001 by directly typing it in on the remote. A small keyboard appears and you alter the keys accordingly.

[bitchmonkey]

i am new to the arnet model and always used to have a pace box and prog the keys., not had a chance to try the arnet, did it work

[cmcs72]

Hi not getting anything on mine

[bugaloo41]

It defo works done my ons earlier today. Just take your time. There are 2 keys key 00 and 01. You dont alter that element of the data you only change the 16 digits code. Probably only a few should need changed. Just follow the instructions on the screen for navigating.

On any channel press 6001 and you are taken to list of cable providers. Move down to your area and change to reflect the key data in keymaster.

[bitchmonkey]

It defo works done my ons earlier today. Just take your time. There are 2 keys key 00 and 01. You dont alter that element of the data you only change the 16 digits code. Probably only a few should need changed. Just follow the instructions on the screen for navigating.

On any channel press 6001 and you are taken to list of cable providers. Move down to your area and change to reflect the key data in keymaster.

are yours still working and your getting all channels and no jumping? i have a arnet unit and used the new keys but no joy.

when i enter 6001 there is 2 lines on the left both saying cw, i then went into each and changed the corresponding 2 lines with them from ketmaster. if u think i need to do more please let me know. once i enter the new keys i save and exit, no more..should i then re scan?

[bugaloo41]

BM you are right mate.

I havent been near this box since updating it. It was working now it aint. Clearly what is happening is that the box automatically tries to auto update or read the key stream knocking off your manual update.

I will just stick another box in for now but not much help for you guys unless you can find a way of turning off the auto emu.

[bitchmonkey]

think i will be putting the pace 1000 back in and using the new keys in the fan au card i have. need to remember what to do with it now!!!!!!!

[delboy13]

mine worked with the 6001 channel.i changed keys it went to update so i checked keys and 1 of them had changed.so i done codes again took power cable out afterwards.when i plugged it in again it went to update checked codes and 1 had changed so i did codes again and pressed save then opened codes again without changing anything pressed save again then went to channels and they were working.

SORRY ONLY WORKED FOR A FEW MINUTES THEN TRYS UPDATING

[bitchmonkey]

arnet

i have been given instructions now and firmware update to get box working again, not had chance to sort a kids playing on wii. i so need to know if it works, i have never had to connect my pc to the arnet so please wish me luck that i now what im doing
there are 3 files i share here

the prog required to connect to arnet
the instructions for anyone needing them
the new firmware

if anyone gets it working please let me know so i have something to look forward to

[mickeeb]

arnet 700

Does any one know what the new key is

[frank2010]

Am having issues too, hope this fixes it!

[bugaloo41]

You need to reflash your box with the new firmware to get it back up and running.

[ravenr1]

i have been given instructions now and firmware update to get box working again, not had chance to sort a kids playing on wii. i so need to know if it works, i have never had to connect my pc to the arnet so please wish me luck that i now what im doing
there are 3 files i share here

the prog required to connect to arnet
the instructions for anyone needing them
the new firmware

if anyone gets it working please let me know so i have something to look forward to

dose ony on have codes for this box