New UK cable keys - see here

[toto67]

Thats strange as my box in my dinning room is working fine but the other ones aint..Must be cause that one has the DW2 on it...G,will a reflash work ok m8 ir wont that matter a jot?

[Jaffa]

Thanks for info Kaos. I didnt have time to do it though, watching the match (get in there) and I am now off to work so will try tomorrow.

There is only one line in my keylist so don't know which one to use as there are 2 lines of new keys. Maybe it will be sorted tomorrow when I try.

[davidharvey75]

Cheers guys trying it now. But you will probably get a wee note back soon. so bare with me.

[thommo]

weird on my box with tuxbox i go to var/keylist.txt and its empty...leeds ex c&w.


dumbass me pushed ok instead or 4 to edit....

[Neil]

Also, you need to edit the camd_cfg file (for evocamd), the mg_cfg file (for mgcamd) or the gbox_cfg file (for gbox) in /var/keys.

What will happen if I don't turn off the AU?

[davidharvey75]

Well i told you. Glen, i followed the video, so now i know what to do.
But i take it i don't just follow what he does (as in changing the 27 to 5b) cause that is what i did.
And thanks thommo, but are these keys okay for a dbox2.
Sorry for the pain thats now in your neck.

[toto67]

There's a few ways you can edit the keys!

You can ftp to the box and go to /var/keys.

Edit the keylist.txt file (if using evocamd) or the SoftCam.key file (if using mgcamd) or nagra file (if using gbox). Enter the keys in the above post, save and close.

Also, you need to edit the camd_cfg file (for evocamd), the mg_cfg file (for mgcamd) or the gbox_cfg file (for gbox) in /var/keys.

Make sure that this section of the file looks like this...

# AU
#    00 is ignored (default)
#    01 enable AU
#    02 AU Auto
A: { 02 }

Save and exit.

Restart the emu, usually an option in the BLUE button menu (Blue -> OK).

Or reboot the box.

Should come back on when it reboots.

------------------

OR

If your image has the tuxbox commander plugin in it, you can edit the keys on the box.

Enter plugin menu, might be yellow or blue button and select tuxbox commander.

Navigate to the /var/keys folder, highlight the Keylist.txt file and press 4 to edit it.

Enter the proper keys in, exit and save file.

Restart the emu or reboot box, should be ok.

Just checked mines G and they already have the keys you have uploaded.mmm,thats strange that is....Need to get my spade out

[smirnoff_rules]

do these work for the 600?

just got mine working with the new keys m8 u up and running now ? r u tw or ntl m8 have the tw files to insert into box

[gazz10]

Hmm i tried both keys follow the tut, and the vid and still blank screen after reboot, guess am another noob at this dreambox stuff

[thommo]

gazz where are you though? ex c&w is down and from what i see the keys are not up here yet?


will be same method just with the ex c&w keys.

[gazz10]

gazz where are you though? ex c&w is down and from what i see the keys are not up here yet?


will be same method just with the ex c&w keys.

its ex TW and glasgow area

[thommo]

oh ok, id just double check you have inserted the keys ok, fat fingers ect....

double check to be sure.....

[Neil]

gazz where are you though? ex c&w is down and from what i see the keys are not up here yet?


will be same method just with the ex c&w keys.

What area ex C&W are you after?

[davidharvey75]

Well Thommo i think i was a bit thick and you were right. Typed in the top line of the ex-tw key. saved rebooted and it worked. all channels worked. But when i was flicking through them they went off again.
Went back into the tubox commander and it had reverted back to the old key with the one i had entered down at the bottom.
Retrying the process again.

[father ted]

just got mine working with the new keys m8 u up and running now ? r u tw or ntl m8 have the tw files to insert into box

am tw m8 ive stil not got it going ?