problem after flashign with dw image

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tweenage
    Member
    • Nov 2008
    • 60

    #1

    problem after flashign with dw image

    right ok , just tried to do a dw image dreambox, did factory reset to clear teh channels , but some remained in the bouquet, never had that before on my enigma image. but succesfully connected to it using cute ftp , delted the 10 & 11 roms replaced the 7 rom , now when i goto scan it doesnt find any pay channels only the free to air ones?
    and taht is by using brute force scanning
    any 1 got any ideAS?

    many thks
    Last edited by tweenage; 7 December, 2008, 20:17.
  • scuba
    Top Poster
    • Sep 2008
    • 198

    #2
    press and hold info button and see if the evocam is activated

    Comment

    • tweenage
      Member
      • Nov 2008
      • 60

      #3
      hi , would taht stop it form finding any channels?

      Comment

      • Curious123
        V.I.P. Member
        • Apr 2008
        • 2591

        #4
        Make sure you have copied the latest cables.xml file to va/etc.

        Comment

        • tweenage
          Member
          • Nov 2008
          • 60

          #5
          Originally posted by Curious123
          Make sure you have copied the latest cables.xml file to va/etc.

          ok many thks , just ftp it over yeah?>

          slight problem , where can i get the file from ?

          many thks once again

          Comment

          • sabb
            Junior Member
            • Aug 2008
            • 31

            #6
            Hi, presss the blue button and check is three a evocamd. had same problame, upload image from site but i can't find evocamd in image.try scan first den change the rom.

            Comment

            • Devilfish
              Administrator
              • Feb 2008
              • 7872

              #7
              If it's a Digitalworldz image then evocamd will be in the blue button menu.

              If it's a Digital-Kaos image to access the emu manager you hold INFO down for about 3 secs.

              Comment

              • tweenage
                Member
                • Nov 2008
                • 60

                #8
                so do i need to make sure evocam is active?
                and if tis not this will make it not find any channels?
                is that right ?

                Comment

                • Devilfish
                  Administrator
                  • Feb 2008
                  • 7872

                  #9
                  Evocamd is always active.

                  If you are not getting channels from a scan, it means your signal is too weak or too strong. If you get the channel but it's just blank, that's an emu or key issues.

                  http://www.digital-kaos.co.uk/forums/f34/blank-screen-dreambox-73

                  Recent issues have seen some people not being able to pick up setanta using normal methods. This may be a totally different issue and one that we don't have a fix for yet.

                  Comment

                  • tweenage
                    Member
                    • Nov 2008
                    • 60

                    #10
                    ok , thks just as i said not gettign any channels picked up/
                    not that its finding them and remaining blank , just never finding them , used to work prior to key roll on teh 27th ,

                    ps ur link to blank dreambox aint working

                    Comment

                    • jckw
                      DK Veteran
                      • Sep 2008
                      • 760

                      #11
                      have u changed ur au
                      we are all learning each day

                      Comment

                      • tweenage
                        Member
                        • Nov 2008
                        • 60

                        #12
                        yes . deleted old roms and stuck rom7 in via ftp

                        Comment

                        • jckw
                          DK Veteran
                          • Sep 2008
                          • 760

                          #13
                          no go to cmd config and change line 19 frm o1 to o2
                          we are all learning each day

                          Comment

                          • tweenage
                            Member
                            • Nov 2008
                            • 60

                            #14
                            i have to link it back upto the pc?

                            Comment

                            • jckw
                              DK Veteran
                              • Sep 2008
                              • 760

                              #15
                              pm me and ill tell you
                              we are all learning each day

                              Comment

                              Working...