Guide: How to Create a DM500 Dreambox Image

[pornage]

hi devilfish

....
/etc/init.d/init1
/bin/showlogo/ /bin/bild
....

this is right or ?
i copyed it from the /etc/init.d/rcS

no picture =( suckx hard :x don't knew now what i can try =(

edit: just another quest .

is it possible to make the .img not as read-only filesystem ?

[Devilfish]

....
/etc/init.d/init1
/bin/showlogo/ /bin/bild
....

Don't put the trailing slash after showlogo...

/etc/init.d/init1
/bin/showlogo /bin/bild

Also make sure the 'showlogo' file is in /bin too.

Did you put the bild file in /bin and make it chmod 755?

No, only the /var folder is read/write. That's just the way enigma is.

[kookakal]

what about clones?

I follow the procedure and make a simple image for my dm 500 and know i will try to put plugins and other stuff.

But it is important for me to know if this image i create can harm other peoples who don't have the original dm 500?

thnx in advance

[Devilfish]

As far as I know, it will work on clone boxes ok.

[killunix]

hi,i need add the "arp" command into my box,how can i do? thanks !!!!

[osborne82]

hi,i need add the "arp" command into my box,how can i do? thanks !!!!

edit buysbox.config in /cdk/patches
u can add/ remove alot of things from here buddy


cheers

osborne82

[killunix]

edit buysbox.config in /cdk/patches
u can add/ remove alot of things from here buddy


cheers

osborne82

i did what you say,change the buysbox.config file,set the CONFIG_ARPING=y,I can compired and get the image. but i need the "arp" command to change my dreambox's gateway's MAC address, the "ARPING" command can't do it,and the busysbox.config file has not the CONFIG_ARP option,i added it, but cann't compiled.

anyone can tell me how can i add the arp command into box? or tell me how can i compile the arp.c
thank you very much!!

[exclusive2020]

Thank you, my brothers of the subject, and I have distinct consequences for the inquiry files that were downloaded from the site where the author Rabid Sher Bay course because I use ubunto 8.10

[satman]

i did what you say,change the buysbox.config file,set the CONFIG_ARPING=y,I can compired and get the image. but i need the "arp" command to change my dreambox's gateway's MAC address, the "ARPING" command can't do it,and the busysbox.config file has not the CONFIG_ARP option,i added it, but cann't compiled.

anyone can tell me how can i add the arp command into box? or tell me how can i compile the arp.c
thank you very much!!

if you have the .c source why cant you cross-compile it using the gcc and stuff in /root/cdk folder,,,

[exclusive2020]

cvs-d [email protected]: / cvs / tuxbox-z3 co-P-rdreambox.

This step does not respond and I think the problem of the same biographical Is it a solution to this problem

[Devilfish]

The command you've typed above is wrong...this is the correct command...

cvs -d [email protected]:/cvs/tuxbox -z3 co -P -rdreambox .

Remember the dot at the end.

[exclusive2020]

Do you say thank you to my brother and I put the same is now set by the same problem and I do not respond and give me the following

exclusive@ubunto:~/tuxbox-cvs$ cvs -d [email protected]:/cvs/tuxbox -z3 co -P -rdreambox .
ssh: connect to host cvs.tuxbox.org port 22: Connection timed out
cvs [checkout aborted]: end of file from server (consult above messages if any)

[Devilfish]

Looks like the tuxbox server was unavailable at the time.

Maybe try again in 24hrs.

[exclusive2020]

y sir thank you for your cooperation and your good
And they have not forgotten all appreciation and respect
Accept greetings

Cheers

[exclusive2020]

exclusive@exclusive-desktop:~$ mkdir tuxbox-cvs
mkdir: cannot create directory `tuxbox-cvs': File exists
Devilfish
Administrator

exclusive@exclusive-desktop:~$ cd tuxbox-cvs
exclusive@exclusive-desktop:~/tuxbox-cvs$ export CVS_RSH=ssh
exclusive@exclusive-desktop:~/tuxbox-cvs$ cvs -d [email protected]:/cvs/tuxbox -z3 co -P -rdreambox .
[email protected]'s password:

This step of my sir
The problem is that he asked password
I know
Please help me