Guide: How to Create a DM500 Dreambox Image

[glyndwrw]

I am not sure if this is where I should post this but I recently loaded a DK image on my DREAMBOX 500c. I installed the channels but was unable to change the keys as there was no Keys/List directory. Can anyone advise me what I need to do

[marouan]

thanks thanks

[ajeeb]

well, thanks for the topic
I do success to compile to compress a basic Image and it's works gr8 with FTA channels ... it's gr8 start thanks to u all
but I wonder when I telnet my basic box and copy emu and chmod it with 755 then run it ... it's starts and load everything but no decode
anybody can? help me for 1st step
another question where to find good source for DVB subtitle and not text based titles

BR
keep going

[Devilfish]

Make sure you have the correct files in /var/keys and /var/etc.

If you are starting the emu in telnet, it should give some indication of what is wrong, i.e. missing files, etc.

/var/bin/evocamd &&

[ajeeb]

thanks for reply everything o.k but no decode at all !

~ > ./var/bin/CCcam -dv
14:19:03.684 CCcam: ======================================================================
14:19:03.686 CCcam: starting CCcam 2.0.10 compiled on Nov  1 2008@14:56:24
14:19:03.687 CCcam: ======================================================================
14:19:03.688 CCcam: online using nodeId f08c84eeb3823860
14:19:03.707 CCcam: DM56xx/500/600 detected
14:19:03.708 CCcam: create 2 cam device(s)
14:19:03.788 CCcam: added 764 keys from /var/keys/SoftCam.Key
14:19:03.833 CCcam: added 434 keys from /var/keys/AutoRoll.Key
14:19:03.834 CCcam: static cw not found or bad
14:19:03.855 CCcam: parsed 325 entries from /var/etc/CCcam.prio
14:19:04.001 CCcam: added 1236 provider names from /var/etc/CCcam.providers
14:19:10.016 CCcam: added 7632 channel names from /var/etc/CCcam.channelinfo
14:19:10.017 CCcam: server started on port 12002

ps. I have ubuntu localy SERVER
and at Dreambox display shown the service could not be descrambled
and when zap channel EMU not responding maybe it's PMT? handle or related
BR

[eslamabdel]

Thanks a lot for your help

[alexmitton]

Mite have a crack at an new image on Sunday. Cheers for the tutorial.

[despdan]

--

Resolving tuxbox.berlios.de... 195.37.77.138
Connecting to tuxbox.berlios.de 195.37.77.138:80...connected.
HTTP request sent, awaiting response...404 Not Found
2009-05-02 12:57:42 error 404: not found

make: ***[Archive/nptl-06.tar.bz2] Error 1

Any ideas what went wrong?

[red devil]

have a look here m8
Dreambox Board by Dream-Multimedia-Tv | openembedded | Not Found "apps.tuxbox.libs_cvs.tuxbox.org__200509 12.tar.gz"

[despdan]

Ok have found:nptl-06.tar.bz2 downloaded it now where do i shove it

OK found where to shove it now getting these errors:

config.status: creating config.h
config.status: executing depfiles commands
configure: WARNING: unrecognized options: --with-driver, --with-webif, --with-epg, --with-flashtool, --with-reiserfs, --with-ext-flashtool, --with-enigma-debug, --with-mhw-epg
make -C /home/tony/Desktop/tuxbox-cvs/apps/dvb/tools/stream all install
make[1]: Entering directory `/home/tony/Desktop/tuxbox-cvs/apps/dvb/tools/stream'
powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. @MPEGTOOLS_CFLAGS@  -I/home/tony/Desktop/tuxbox-cvs/driver/include  -Wall -mcpu=405 -msoft-float -mmultiple -mstring -meabi -pipe -Os -ggdb3 -DHAVE_DREAMBOX_HARDWARE -DHAVE_DREAMBOX_DM500 -MT streampes.o -MD -MP -MF .deps/streampes.Tpo -c -o streampes.o streampes.c
powerpc-tuxbox-linux-gnu-gcc: @MPEGTOOLS_CFLAGS@: No such file or directory
make[1]: *** [streampes.o] Error 1
make[1]: Leaving directory `/home/tony/Desktop/tuxbox-cvs/apps/dvb/tools/stream'
make: *** [.stream] Error 2
tony@ubuntu:~/Desktop/tuxbox-cvs/cdk$

Any help please

[codric]

Thnx dudes, all are working

[Wizard1]

Hi Devilfish

One other thing to note...

When you create an enigma image, all your files go in /var_init; /var is always empty.

The reason for this is, when the image boots for the first time, it copies everything from /var_init to /var. It only does this on first boot or if you have selected the 'factory reset' option.

You should be asked to select the language, timezone and PAL. This is the image configuring the /var/tuxbox/config/enigma/config file.

The config file is useful for setting default options.

When you select Menu > Setup > Expert Setup, you have a few options that you can 'tick'. These are defined in the config file. To find out what each line does by comparing the file before and after you change an option. Reboot to take effect.

Is there anyway of altering or adding to the var_init directory & saving the changes, so that the new editions or alterations apply after a factory reset.

Regards

Wizard1

[Dazza]

How many differences, or what else do I need to have a go at this, but for a Neutrino based image? I wouldn't mind having a play at this, and testing myself out, but I tend to like the Neutrino stuff better...

Anybody like to give me a few hints, and words of advice please?!

Sorry if this in the wrong section BTW!

[julio501]

Hi all boss , should i precise that im living in cork irl c..s as provider do i still need all this stuff to build my dm500
thanks for helping

[julio501]

hi everyone , does someone give me hand .
i need a update channels list for starview 2 the box ,im living in cork irl
thanks for helping