problems with auto updating the dbox2

[manunited20185]

hiya i have followed every instructions on how to how to auto update the dbox/or ftp the box but it doesnt work. when i used the cute ftp, i get this message saying, "Can't read from control socket. Socket error 10054". and when i used the flash fxp it says "connection failed. no route to host"

i need help please

[Elric]

is the ip of the box is same as you put in flashfxp,also are you using a x over cable and make sure your lan connections is set 1 digit below the box ip

ie box = 192.168.002.0010
lan = 192.168.002.009

[Dowie]

Hi check the network settings on the box and set them manually then use a x-over cable (Or dbox2 on DHCP - router - pc via wireless PM me if you need more info!!) I find if you use a x-over cable and set the PC to manual IP on 192.168.1.1 and then the box to 192.168.1.2 and use an FTP program (I use Filezilla) and put the user name as root and the password as dbox2 it should connect then you can send the auto update files to the box

Dowie

[manunited20185]

is the ip of the box is same as you put in flashfxp,also are you using a x over cable and make sure your lan connections is set 1 digit below the box ip

ie box = 192.168.002.0010
lan = 192.168.002.009

yeah i put the ip in the flashfxp as same as the box and i am using a ethernet cable

[Devilfish]

what is the ip address of the dbox and your PC?

are you connected directly to your PC or via a router?

[manunited20185]

what is the ip address of the dbox and your PC?

are you connected directly to your PC or via a router?

the ip address on my dbox is 192.168.1.101 and on my pc it is 192.168.1.100

i am connected to the pc through the ethernet cable

[MetMan]

the ip address on my dbox is 192.168.1.101 and on my pc it is 192.168.1.100

i am connected to the pc through the ethernet cable

direct or thru router

if direct using a xover ethernet?

[manunited20185]

direct or thru router

if direct using a xover ethernet?

i am using direct