no fta

[cr1stef]

With your help in a previous thread I have flashed a working commando 10 image using Hallenberg, I put on a services file for my area and rebooted but the Net Id, Frequency and Symbol rate are not shown when doing a scan. I scanned anyway and the box found all the channels but then no picture even fta. I have tried on both my boxes but have the same problem - what am I doing wrong. Thanks for any help

[MetMan]

With your help in a previous thread I have flashed a working commando 10 image using Hallenberg, I put on a services file for my area and rebooted but the Net Id, Frequency and Symbol rate are not shown when doing a scan. I scanned anyway and the box found all the channels but then no picture even fta. I have tried on both my boxes but have the same problem - what am I doing wrong. Thanks for any help

look in the var/emu folder if it's empty ewith not even camd2 fta will not work also chk the var/kys folder - or was this img once working? if so u need to set ur location then scan

[cr1stef]

var/bin/emu contains:
evocamd.stapi
evocamd.ppc
evocamd.mips
evocamd
cam_cfg
the rom fix is in keys.
this was sent to me from a contact on the forum - all i was supposed to have to do was to put in my services file. On the initial flash it worked for a day or so but the lost everything. I have flashed again and has not worked since. When i choose my location the message to resart the box does not come up - it does if i try other areas. If i manually resart then then it does not fill in the NETID, frequency and symbol rate in the scan menu.

[MetMan]

var/bin/emu contains:
evocamd.stapi
evocamd.ppc
evocamd.mips
evocamd
cam_cfg
the rom fix is in keys.
this was sent to me from a contact on the forum - all i was supposed to have to do was to put in my services file. On the initial flash it worked for a day or so but the lost everything. I have flashed again and has not worked since. When i choose my location the message to resart the box does not come up - it does if i try other areas. If i manually resart then then it does not fill in the NETID, frequency and symbol rate in the scan menu.

put ur location settings in manually then scan

[cr1stef]

How do I put them in manually?

[MetMan]

How do I put them in manually?

press dbox-service-servicescan and edit the settings

[cr1stef]

done scan and still the same. flashed again and did another scan sttill no fta

[plasterer]

Post your scan settings
SP
And Location..............................Paul

[cr1stef]

net id 41047 frequency562750 symbol rate6887
ex c&w hanwell, london

[plasterer]

2 options for Hanwell mate.............Paul


Hanwell 1 - W.London NTL/C&W 41047 666750 6887
Hanwell 2 - W.London NTL/C&W 41047 562750 6887

[cr1stef]

tried both - same result

[MetMan]

done scan and still the same. flashed again and did another scan sttill no fta

so no channels at all?? maybe ur tuners ~~~~ed

[plasterer]

Push red then blue
wots the readings
Attatch a null mowdem and run boot manager paste the results here.......Good Luck .....................Paul

[cr1stef]

BER SNR SIG
59360 44975 35466
59360 43200 35466
59360 41120 35209

Have not got null modem - will get tomorrow. is i need an amplifier which one is recommended

[gizmo.1484]

Your snr is too low it has to be above 55000 to receive any channels even fta ones.
Is there any splitters on the main feed if so then take them off and see if that helps if not then you need a signal booster you can get them cheap now.