waiting for time

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • young
    DK Veteran
    • Oct 2008
    • 316
    #1

    waiting for time

    hi all woundering if any one can help getting this message it came up all of a sudden tried red and blue but getting 0 on the bit rate snr is bellow 55000 it isnt the feed as i have tried another box on the same line tried a new image blade quade and also reset the cams and set the ucode ...any help would be thankful
    do you think it could be a dodgy tuner?
    Tags: time, waiting
    • Krypton
      DK Veteran
      • Jan 2009
      • 694
      #2
      If you can, take a normal aerial cable and plug the RF out on the dbox into the aerial socket on your TV.. If you tune in the analog channels on your TV you should get some FTA channels, i.e. bbc, itv, etc. if you don't get any channels the tuner is ~~~~ed mate
      Khan, you bloodsucker! You're going to have to do your own dirty work now, do you hear me? Do you?

      Chuck Norris has two speeds: Walk and Kill
      There is no "Ctrl" button on Chuck Norris' PC: Chuck Norris Is always in control
      Evolution is a myth. There are only the animals Chuck Norris has allowed to live.
      Chuck Norris does not sleep: He waits

        Comment

        • young
          DK Veteran
          • Oct 2008
          • 316
          #3
          getting channels got gold ,bloomberg,and a few others..
          does this mean the tuner is not gone and any suggestions
          Last edited by young; 21 March, 2009, 14:24.

            Comment

            • Danril
              Top Poster
              • May 2008
              • 122
              #4
              Best thing to do is post a boot log from bootmanager and let the experts on here have a squizz on it. You're going to need a null modem cable for that.

                Comment

                • Devilfish
                  Administrator
                  • Feb 2008
                  • 7872
                  #5
                  If SNR is below 55,000 then you won't clear any channels or get channels after a scan.

                  Disconnect all your coax back to the wall and reconnect it making sure it's tight. If that doesn't help, you will need a signal booster.

                  The test above confirms the tuner is ok so seems like a signal issue.

                    Comment

                    Previous template Next
                    Working...