Satellite options coming up after location set?

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • kevsta
    Junior Member
    • Nov 2008
    • 25
    #16
    No channels were found with Fast Scan off either?

    Here is the bootlog from the box if one of the resident Dbox Geniuses wouldn't mind taking a quick glance to put me out of my misery!!

    Thanks in advance!

      Comment

      • kevsta
        Junior Member
        • Nov 2008
        • 25
        #17
        will verify ELF image, start= 0x800000, size= 162920
        verify sig: 262
        Branching to 0x40000


        U-Boot 1.2.0 (Tuxbox) (Nov 5 2007 - 10:24:09)

        CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
        *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
        Board: DBOX2, Nokia, BMon V1.0
        Watchdog enabled
        I2C: ready
        DRAM: 32 MB
        FLASH: 8 MB
        Scanning JFFS2 FS: .. done.
        FB: ready
        LCD: ready
        In: serial
        Out: serial
        Err: serial
        Net: SCC ETHERNET

        Options:
        1: Console on null
        2: Console on ttyS0
        3: Console on framebuffer
        Select option (1-3), other keys to stop autoboot: 0
        ### FS (squashfs) loading 'vmlinuz' to 0x100000
        ### FS load complete: 669732 bytes loaded to 0x100000
        .................................................. ............. done
        Un-Protected 63 sectors
        ## Booting image at 00100000 ...
        Image Name: dbox2
        Image Type: PowerPC Linux Kernel Image (gzip compressed)
        Data Size: 669668 Bytes = 654 kB
        Load Address: 00000000
        Entry Point: 00000000
        Verifying Checksum ... OK
        Uncompressing Kernel Image ... OK
        Linux version 2.4.35.3-dbox2 ([email protected]) (gcc version 3.4.4) #1 Mon
        Nov 5 10:25:31 GMT 2007
        On node 0 totalpages: 8192
        zone(0): 8192 pages.
        zone(1): 0 pages.
        zone(2): 0 pages.
        Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
        Decrementer Frequency = 252000000/60
        m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
        m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
        Console: colour dummy device 80x25
        Calibrating delay loop... 66.96 BogoMIPS
        Memory: 30828k available (1144k kernel code, 336k data, 60k init, 0k highmem)
        Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
        Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
        Mount cache hash table entries: 512 (order: 0, 4096 bytes)
        Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
        Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
        POSIX conformance testing by UNIFIX
        Linux NET4.0 for Linux 2.4
        Based upon Swansea University Computer Society NET3.039
        Initializing RT netlink socket
        Starting kswapd
        devfs: v1.12c (20020818) Richard Gooch ([email protected])
        devfs: boot_options: 0x1
        JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
        squashfs: version 3.0 (2006/03/15) Phillip Lougher
        i2c-core.o: i2c core module version 2.6.1 (20010830)
        i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
        CPM UART driver version 0.04
        ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
        pty: 256 Unix98 ptys configured
        eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:19:3d:2e
        loop: loaded (max 8 devices)
        D-Box 2 flash driver (size->0x800000 mem->0x10000000)
        D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
        Intel/Sharp Extended Query Table at 0x0035
        cfi_cmdset_0001: Erase suspend on write enabled
        Creating 6 MTD partitions on "D-Box 2 flash memory":
        0x00000000-0x00020000 : "BR bootloader"
        0x00020000-0x00040000 : "FLFS (U-Boot)"
        0x00040000-0x006a0000 : "root (squashfs)"
        0x006a0000-0x00800000 : "var (jffs2)"
        0x00020000-0x00800000 : "Flash without bootloader"
        0x00000000-0x00800000 : "Complete Flash"
        Linux video capture interface: v1.00
        mice: PS/2 mouse device common for all mice
        NET4: Linux TCP/IP 1.0 for NET4.0
        IP Protocols: ICMP, UDP, TCP
        IP: routing cache hash table of 512 buckets, 4Kbytes
        TCP: Hash tables configured (established 2048 bind 4096)
        NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
        VFS: Mounted root (squashfs filesystem) readonly.
        Mounted devfs on /dev
        Freeing unused kernel memory: 60k init
        init started: BusyBox v1.7.2 (2007-11-05 16:35:30 GMT)
        Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
        ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
        dboxide: $Id: main.c,v 1.11 2007/08/07 09:02:15 dbt Exp $
        ide: late registration of driver.
        dboxide: activating cs2
        dboxide: address space of IDE-Interface is at: 0xc3890000
        dboxide: probing dbox2 IDE CPLD: walking bit test failed: 0xfffffffe != 0xfbffff
        dc
        dboxide: no valid IDE-Interface detected
        Journalled Block Device driver loaded
        SGI XFS with no debug enabled
        mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such f
        ile or directory
        event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
        Detected STB:
        Vendor: Nokia
        Model: D-BOX2
        [i2c-8xx]: mpc 8xx i2c init
        [i2c-8xx]: adapter: 0
        $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
        $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
        DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
        DVB: VES1820(0): pwm=0x48
        DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
        dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
        $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
        avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
        avia_av_core: Starting avia_av_wdt thread.
        avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
        avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
        avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
        avia_gt_core: autodetecting chip type... GTX
        avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
        avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
        avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
        avia_gt_core: masking unhandled irq reg 1 bit 11
        avia_gt_core: masking unhandled irq reg 1 bit 13
        avia_gt_ucode: loaded ucode v0014
        avia_gt_ucode: ucode section filters disabled.
        avia_gt_core: masking unhandled irq reg 0 bit 1
        avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
        avia_gt_core: masking unhandled irq reg 0 bit 6
        avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
        avia_gt_gv: set_input_size (width=720, height=576)
        avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
        avia_gt_pcm_set_rate(44100)
        avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
        avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
        avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
        avia_gt_core: Loaded AViA eNX/GTX driver
        avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
        avia_gt_gv: set_input_mode (mode=2)
        avia_gt_gv: set_input_size (width=720, height=576)
        avia_gt_gv: set_input_mode (mode=2)
        avia_gt_gv: set_input_size (width=720, height=576)
        avia_gt_gv: set_input_mode (mode=2)
        avia_gt_gv: set_input_size (width=720, height=576)
        Console: switching to colour frame buffer device 82x32
        avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
        lcd.o: init lcd driver module
        lcd.o: found KS0713/SED153X lcd interface
        avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
        avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
        avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
        avia_gt_pcm_set_rate(44100)
        avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
        avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
        avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
        /etc/init.d/rcS: line 253: cannot create /etc/issue.net: Read-only file system
        Starting the automounter

        Please press Enter to activate this console. avia_oss: IOCTL: SNDCTL_DSP_SPEED (
        arg=44100)
        avia_gt_pcm_set_rate(44100)
        $Id: sectionsd.cpp,v 1.249 2007/10/30 08:48:23 seife Exp $
        [sectionsd] Caching max 6000 events
        [sectionsd] Caching 14 days
        [sectionsd] Caching 6 hours Extended Text
        [sectionsd] Events are old 60min after their end time
        $Id: zapit.cpp,v 1.402 2007/07/22 14:36:42 dbluelle Exp $
        [frontend] uncommitted_switch_mode 0
        avia_gt_core: masking unhandled irq reg 0 bit 7
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x01, val == 0x6a, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x02, val == 0x93, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x03, val == 0x1a, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x04, val == 0x12, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x05, val == 0x46, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x06, val == 0x26, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x07, val == 0x1a, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x08, val == 0x43, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x09, val == 0x6a, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x0a, val == 0xaa, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x0b, val == 0xaa, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x0c, val == 0x1e, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x0d, val == 0x85, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x0e, val == 0x43, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x0f, val == 0x20, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x10, val == 0xe0, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x11, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x12, val == 0xa1, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x13, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x14, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x15, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x16, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x17, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x18, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x19, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x1a, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x1b, val == 0x01, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x1c, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x1d, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x1e, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x1f, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x20, val == 0x02, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x21, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x22, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x23, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x24, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x25, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x26, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x27, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x28, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x29, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x2a, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x2b, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x2c, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x2d, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x2e, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x2f, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x30, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x31, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x32, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x33, val == 0x00, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x34, val == 0x40, ret
        == -121)
        DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x34, val == 0x48, ret
        == -121)
        /tmp/currentservices.xml: No such file or directory
        $Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $

        [controld] Boxtype detected: (1, Nokia D-BOX2)
        [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
        [controld] setting VideoFormat to auto
        [yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)
        [LCDFONT] initializing core...
        [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
        [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
        [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
        [LCDFONT] Intializing font cache...
        [yhttpd] Webserver starting...
        avia_gt_gv: set_input_mode (mode=2)
        avia_gt_gv: set_input_size (width=720, height=576)
        [sectionsd] getUTC: read: Connection timed out

          Comment

          • Fergal
            V.I.P. Member
            • Aug 2008
            • 1007
            #18
            Originally posted by kevsta
            DVB: VES1820(0): ves1820_writereg, writereg error (reg == 0x34, val == 0x48, ret
            == -121)
            Looks like the tuner is faulty you could try replacing the BFG94 but i am not 100% sure that this would cure the problem.

              Comment

              • kevsta
                Junior Member
                • Nov 2008
                • 25
                #19
                Thanks Fergal! I do have a tuner which was soldered into another Nokia I have (which didn't fix that box's problem and tuner was bought as "100% Working")

                If I upload the bootlog from the other box, would you be able to determine if that tuner is ok and maybe see if you can see any thing obvious in the log as to what that box's problem is - the syptoms are not picking up transponders which is why I had the tuner replaced .

                  Comment

                  • kevsta
                    Junior Member
                    • Nov 2008
                    • 25
                    #20
                    Here is the bootlog from the other box I have with a "new" tuner soldered into it - if anyone can spot an obvious problem, I would be grateful for your advice!! Cheers!!


                    ^debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
                    debug: BMon V1.0 mID 01
                    debug: feID 7a gtxID 0b
                    debug: fpID 5a dsID 01-79.72.1b.07.00.00-0b
                    debug: HWrev X5 SWrev 0.81
                    debug: B/Ex/Fl(MB) 32/00/08
                    WATCHDOG reset enabled
                    dbox2:root> debug:
                    BOOTP/TFTP bootstrap loader (v0.3)
                    debug:
                    debug: Transmitting BOOTP request via broadcast
                    debug: Given up BOOTP/TFTP boot
                    boot net failed

                    Flash-FS bootstrap loader (v1.5)

                    Found Flash-FS superblock version 3.1
                    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
                    debug: Got Block #0036

                    will verify ELF image, start= 0x800000, size= 162920
                    verify sig: 262
                    Branching to 0x40000


                    U-Boot 1.2.0 (Tuxbox) (Nov 5 2007 - 10:24:09)

                    CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
                    Board: DBOX2, Nokia, BMon V1.0
                    Watchdog enabled
                    I2C: ready
                    DRAM: 32 MB
                    FLASH: 8 MB
                    Scanning JFFS2 FS: . done.
                    FB: ready
                    LCD: ready
                    In: serial
                    Out: serial
                    Err: serial
                    Net: SCC ETHERNET

                    Options:
                    1: Console on null
                    2: Console on ttyS0
                    3: Console on framebuffer
                    Select option (1-3), other keys to stop autoboot: 0
                    ### FS (squashfs) loading 'vmlinuz' to 0x100000
                    ### FS load complete: 669732 bytes loaded to 0x100000
                    .................................................. ............. done
                    Un-Protected 63 sectors
                    ## Booting image at 00100000 ...
                    Image Name: dbox2
                    Image Type: PowerPC Linux Kernel Image (gzip compressed)
                    Data Size: 669668 Bytes = 654 kB
                    Load Address: 00000000
                    Entry Point: 00000000
                    Verifying Checksum ... OK
                    Uncompressing Kernel Image ... OK
                    Linux version 2.4.35.3-dbox2 ([email protected]) (gcc version 3.4.4) #1 Mon
                    Nov 5 10:25:31 GMT 2007
                    On node 0 totalpages: 8192
                    zone(0): 8192 pages.
                    zone(1): 0 pages.
                    zone(2): 0 pages.
                    Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
                    Decrementer Frequency = 252000000/60
                    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
                    m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
                    Console: colour dummy device 80x25
                    Calibrating delay loop... 66.96 BogoMIPS
                    Memory: 30828k available (1144k kernel code, 336k data, 60k init, 0k highmem)
                    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
                    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
                    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
                    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
                    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
                    POSIX conformance testing by UNIFIX
                    Linux NET4.0 for Linux 2.4
                    Based upon Swansea University Computer Society NET3.039
                    Initializing RT netlink socket
                    Starting kswapd
                    devfs: v1.12c (20020818) Richard Gooch ([email protected])
                    devfs: boot_options: 0x1
                    JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
                    squashfs: version 3.0 (2006/03/15) Phillip Lougher
                    i2c-core.o: i2c core module version 2.6.1 (20010830)
                    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
                    CPM UART driver version 0.04
                    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
                    pty: 256 Unix98 ptys configured
                    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1c:83:e3
                    loop: loaded (max 8 devices)
                    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
                    D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
                    Intel/Sharp Extended Query Table at 0x0035
                    cfi_cmdset_0001: Erase suspend on write enabled
                    Creating 6 MTD partitions on "D-Box 2 flash memory":
                    0x00000000-0x00020000 : "BR bootloader"
                    0x00020000-0x00040000 : "FLFS (U-Boot)"
                    0x00040000-0x006a0000 : "root (squashfs)"
                    0x006a0000-0x00800000 : "var (jffs2)"
                    0x00020000-0x00800000 : "Flash without bootloader"
                    0x00000000-0x00800000 : "Complete Flash"
                    Linux video capture interface: v1.00
                    mice: PS/2 mouse device common for all mice
                    NET4: Linux TCP/IP 1.0 for NET4.0
                    IP Protocols: ICMP, UDP, TCP
                    IP: routing cache hash table of 512 buckets, 4Kbytes
                    TCP: Hash tables configured (established 2048 bind 4096)
                    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
                    VFS: Mounted root (squashfs filesystem) readonly.
                    Mounted devfs on /dev
                    Freeing unused kernel memory: 60k init
                    init started: BusyBox v1.7.2 (2007-11-05 16:35:30 GMT)
                    Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
                    ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
                    dboxide: $Id: main.c,v 1.11 2007/08/07 09:02:15 dbt Exp $
                    ide: late registration of driver.
                    dboxide: activating cs2
                    dboxide: address space of IDE-Interface is at: 0xc3890000
                    dboxide: probing dbox2 IDE CPLD: walking bit test failed: 0x00000001 != 0x01e7b1
                    c5
                    dboxide: no valid IDE-Interface detected
                    Journalled Block Device driver loaded
                    SGI XFS with no debug enabled
                    mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such f
                    ile or directory
                    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
                    Detected STB:
                    Vendor: Nokia
                    Model: D-BOX2
                    [i2c-8xx]: mpc 8xx i2c init
                    [i2c-8xx]: adapter: 0
                    $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
                    $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
                    DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
                    DVB: VES1820(0): pwm=0x48
                    DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
                    dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
                    $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
                    avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
                    avia_av_core: Starting avia_av_wdt thread.
                    avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
                    avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
                    avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
                    avia_gt_core: autodetecting chip type... GTX
                    avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
                    avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
                    avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
                    avia_gt_core: masking unhandled irq reg 1 bit 11
                    avia_gt_core: masking unhandled irq reg 1 bit 13
                    avia_gt_ucode: loaded ucode v001A
                    avia_gt_ucode: ucode section filters disabled.
                    avia_gt_core: masking unhandled irq reg 0 bit 6
                    avia_gt_core: masking unhandled irq reg 0 bit 7
                    avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
                    avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
                    avia_gt_gv: set_input_size (width=720, height=576)
                    avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
                    avia_gt_pcm_set_rate(44100)
                    avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
                    avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
                    avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
                    avia_gt_core: Loaded AViA eNX/GTX driver
                    avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
                    avia_gt_gv: set_input_mode (mode=2)
                    avia_gt_gv: set_input_size (width=720, height=576)
                    avia_gt_gv: set_input_mode (mode=2)
                    avia_gt_gv: set_input_size (width=720, height=576)
                    avia_gt_gv: set_input_mode (mode=2)
                    avia_gt_gv: set_input_size (width=720, height=576)
                    Console: switching to colour frame buffer device 82x32
                    avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
                    lcd.o: init lcd driver module
                    lcd.o: found KS0713/SED153X lcd interface
                    avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
                    avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
                    avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
                    avia_gt_pcm_set_rate(44100)
                    avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
                    avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
                    avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
                    /etc/init.d/rcS: line 253: cannot create /etc/issue.net: Read-only file system
                    Starting the automounter

                    Please press Enter to activate this console. avia_oss: IOCTL: SNDCTL_DSP_SPEED (
                    arg=44100)
                    avia_gt_pcm_set_rate(44100)
                    $Id: sectionsd.cpp,v 1.249 2007/10/30 08:48:23 seife Exp $
                    [sectionsd] Caching max 6000 events
                    [sectionsd] Caching 14 days
                    [sectionsd] Caching 6 hours Extended Text
                    [sectionsd] Events are old 60min after their end time
                    $Id: zapit.cpp,v 1.402 2007/07/22 14:36:42 dbluelle Exp $
                    [frontend] uncommitted_switch_mode 0
                    /var/tuxbox/config/zapit/bouquets.xml: No such file or directory
                    /tmp/currentservices.xml: No such file or directory
                    $Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $

                    [controld] Boxtype detected: (1, Nokia D-BOX2)
                    [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
                    [controld] setting VideoFormat to auto
                    [yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)
                    [LCDFONT] initializing core...
                    [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
                    [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
                    [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
                    [LCDFONT] Intializing font cache...
                    [yhttpd] Webserver starting...
                    avia_gt_gv: set_input_mode (mode=2)
                    avia_gt_gv: set_input_size (width=720, height=576)
                    [sectionsd] getUTC: read: Connection timed out

                      Comment

                      • Fergal
                        V.I.P. Member
                        • Aug 2008
                        • 1007
                        #21
                        Originally posted by kevsta
                        Here is the bootlog from the other box I have with a "new" tuner soldered into it - if anyone can spot an obvious problem, I would be grateful for your advice!! Cheers!!
                        What image is on if commando change it then select evocamd plug feed in then grab another bootlog
                        its also a good idea to attach the bootlog as a .txt file otherwise this thread will be a mile long.

                          Comment

                          • kevsta
                            Junior Member
                            • Nov 2008
                            • 25
                            #22
                            Fergal, sorry about not attaching the bootlogs!

                            I have flashed Blade Quad to the second box as advised, here is the second bootlog..........
                            Attached Files

                              Comment

                              • Devilfish
                                Administrator
                                • Feb 2008
                                • 7872
                                #23
                                Code:
                                [camd] CA_SEND_MSG: Remote I/O error
                                If I remember correctly, that's a problem with the SEC chipset on the mainboard and not the tuner. I didn't see any errors relating to the tuner. It could also be one of the components around the SEC chip, dry joint on a resistor or capacitor, etc. If you're handy with a soldering iron you could try re-sweating the joints before desoldering the tuner. Worth a go...

                                  Comment

                                  • kevsta
                                    Junior Member
                                    • Nov 2008
                                    • 25
                                    #24
                                    Thanks DF! Tried cleaning and pushing in SEC chip to no avail!

                                    So is there any way to be sure that the SEC chip has gone in the 2nd box? I see that dbox.com have replacements for 25 euros - would a TV repairer be able to replace it if I supplied it and, if so, I suppose it would make sense for him to replace the 3 usual components of the tuner on the 1st box too? That would in theory mean 2 working boxes again - Or would I be better off putting 2nd box tuner into 1st box then binning the rest (minus screen ) - Please advise, cheers!

                                      Comment

                                      • 087paul25
                                        Newbie
                                        • Mar 2009
                                        • 1
                                        #25
                                        thanks lads

                                          Comment

                                          • Fergal
                                            V.I.P. Member
                                            • Aug 2008
                                            • 1007
                                            #26
                                            Originally posted by kevsta
                                            Thanks DF! Tried cleaning and pushing in SEC chip to no avail!

                                            So is there any way to be sure that the SEC chip has gone in the 2nd box? I see that dbox.com have replacements for 25 euros - would a TV repairer be able to replace it if I supplied it and, if so, I suppose it would make sense for him to replace the 3 usual components of the tuner on the 1st box too? That would in theory mean 2 working boxes again - Or would I be better off putting 2nd box tuner into 1st box then binning the rest (minus screen ) - Please advise, cheers!
                                            Originally posted by 087paul25
                                            thanks lads
                                            I would not bother you would need expert soldering skills and equipment to replace the sec chip
                                            i would try replacing the BFG94 in the other box first


                                            Originally posted by 087paul25
                                            thanks lads
                                            For what being a one hit grab and run never to be seen again toss*r

                                              Comment

                                              • gula
                                                Newbie
                                                • Jun 2009
                                                • 1
                                                #27
                                                i would recommend to change the image i bought a box it look the same but wen i change the image i got all setting back and working ...finger cross

                                                  Comment

                                                  Previous 1 2 template Next
                                                  Working...