flash chips/image problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lannyb2000
    Junior Member
    • May 2008
    • 38

    #1

    flash chips/image problem

    hi every1

    got a serious problem here,running a nokia d-box2 with lincast fullish image worked great for weeks,went down every now and again but just restarted the emu and was fine again,but cause i work shifts the missis did not no what to do when it went down,so i put blade quad on and transfered the nag 7 file over to var/keys no problem run like a dream for weeks then the other day just went off completely,restarted emu but nothing so iflashed lincasts image back on set my location and did a scan but it did not pick any channels up nothing the scan took about 2 minutes,so i tried the blade image again same thing picking no channels at all up,now i have flashed a few mates boxs in the past with no problems at all and all their boxs are still runnung fine,is their any thing else i can try to get it going or could the flash chips in the box be knackered,has any 1 else had any problems like this any advice would be appriciated

    cheers vince
  • thebigman
    Top Poster
    • Jun 2008
    • 176

    #2
    is your normal subbed box ok? Are there any service problems in your area? Is your connector at the back of the box a good tight fit?

    Have you tried adding channel and bouquet files for your area, then you wont have to scan.

    Doubt it'll be anything to do with the flashchips more likely a tuner problem if its a hardware fault.

    thebigman

    Comment

    • lannyb2000
      Junior Member
      • May 2008
      • 38

      #3
      cheers mate

      it might be a problem with the box.took it to my dads and tried a scan,same thing picked up no channels,gona see if my dads box works at mine,looking like a tuner problem is their any way to check this

      cheers vince

      Comment

      • plasterer
        V.I.P. Member
        • Jun 2008
        • 1631

        #4
        Attach a null modem cable
        And run boot manager
        Post the results on here as a text Doc .................Paul
        If your Happy with the Help push the Thanx button
        PAUL

        Comment

        Working...