Missing Channels and bad reception

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pure_jax
    Newbie
    • Jun 2009
    • 15
    #1

    Missing Channels and bad reception

    Hi All,

    I have a nokia dbox2 and have recently lost some channels and am getting terrible reception on the ones i have.

    I have read through the various posts and am thinking about flashing my dbox2 with a new image.

    Can you please advise on the following: -

    1) what is the best image to use
    2) how to transfer the new image to the dbox2 and flash it using a crossover cable and flashfxp

    I look forward to your comments guys.

    Regards,

    pure_jax
    Tags: None
    • ss0000
      Top Poster
      • Mar 2009
      • 151
      #2
      Hi and welcome.
      You need to do some reading my friend, use the search facility and dloads sections for tutorials

        Comment

        • pure_jax
          Newbie
          • Jun 2009
          • 15
          #3
          Well i am new to all this dbox stuff have done some searching and have found a guide on how to flash it using a crossover cable. Any idea on where to get the images i believe i'm using V++ image with neutrino?

          pure_jax

            Comment

            • yaas
              Top Poster
              • Jun 2009
              • 188
              #4
              The Channels are all there

              The channels' frequency has changed but its all there with a few extras, but some channels are sticking before completely dying.
              I have never flashed my box. I am used to flashing Eurovox, Digivox & Starview but I have some kind of phobia with regards to the Nokia DBox2.
              Can someone PLEASE help...

              THanks.

                Comment

                • ss0000
                  Top Poster
                  • Mar 2009
                  • 151
                  #5
                  Originally posted by pure_jax
                  Well i am new to all this dbox stuff have done some searching and have found a guide on how to flash it using a crossover cable. Any idea on where to get the images i believe i'm using V++ image with neutrino?

                  pure_jax
                  There are plenty of images in the dloads section to try. See which one works best and is most stable for your box. There is no definite answer to which is the best image as all especially the latest are top notch. Also make sure you know whether your box is 1x or 2x chip so you don't flashed the wrong image. Hope this helps

                    Comment

                    • pure_jax
                      Newbie
                      • Jun 2009
                      • 15
                      #6
                      I have successfully managed to flash my dbox2 using the blade quad and commando 11 images however i am still missing channels.

                      Any suggestions?

                      pure_jax

                        Comment

                        • ManofScience
                          DK Veteran
                          • May 2009
                          • 650
                          #7
                          tuner or signal then.

                          any splitters on the line? direct feed from the wall?

                            Comment

                            • Salami
                              DK Veteran
                              • Apr 2008
                              • 535
                              #8
                              Originally posted by pure_jax
                              I have successfully managed to flash my dbox2 using the blade quad and commando 11 images however i am still missing channels.

                              Any suggestions?

                              pure_jax
                              What image are you using right now?
                              If you like my post pleas click on the little button to say thank you.

                                Comment

                                • pure_jax
                                  Newbie
                                  • Jun 2009
                                  • 15
                                  #9
                                  I'm using the commando 11 image

                                  I'm pretty sure its not the signal although it is split from the official Virgin receiver but has been since i got it and i never used to have any problems.

                                  Would a new cam i.e 2.17 fix this issue as i want to get sky sports news back

                                  please help.

                                  pure_jax

                                    Comment

                                    • satsmo
                                      V.I.P. Member
                                      • Jun 2008
                                      • 6397
                                      #10
                                      Scan from the direct feed take the splitter out. You can put it back after the scan.

                                      Turn fast scan off as some transponders may have changed in your area and will need to be updated. If channels are still missing try a bruteforce scan.
                                      I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

                                        Comment

                                        • defurthegreat
                                          Newbie
                                          • Sep 2008
                                          • 1
                                          #11
                                          i had a similar problem to the original poster, using Commando 11. have just switched it to Andromeda v2.0 and everything seems fine

                                            Comment

                                            Previous template Next
                                            Working...