dbox in ireland (cam update)??

[steo2k9]

Is there any cams that run on a dbox in ireland that run n2?

[mtv1]

plain and simple no m8 not yet any how

[steo2k9]

Just wondering because dreambox has one and it won't run on dbox thanks.

[2tone]

i think the cam would need some changed to work on a d-box not saying it will but good chance it might be converted to work on d-box would be a shame if it was not

[steo2k9]

I've tried messing around a bit and it runs and writes to the log and gets codes but the screen stays black and part of the log says failed to open device so i'd imagine there's some incorrect files.

[ruprect]

Since it is running on enigma images I would test it on dbox enigma images.

[wozzo]

Apparently a member on Dw and other forums got up and running by creating a SofCam.key file with the keys out of the hypercam.keys file and using it alongside CCcam.

Have been trying the same hing with MGcamd and still no go.

[satman]

Mgcamd and evocamd dont work with correct keys..

they are using invertedCW in UPC ireland for prov 5e01/5f01. and even that would lead me to think id be suprised if cccam worked. but it may support the invertcw, i didnt test that

[wozzo]

Mgcamd and evocamd dont work with correct keys..

they are using invertedCW in UPC ireland for prov 5e01/5f01. and even that would lead me to think id be suprised if cccam worked. but it may support the invertcw, i didnt test that

Cheers Sats that explains it, at least i can stop wasting my time with them cams.

There are so many CCcam versions, think i trew everything at it. Any idea of other cams that can do invertedCW?

am still trying Hypercam on and off, my dbox lagged like hell when i got it running.

[satman]

mabie american cam like rqcamd etc is more specific to n2 and may have options?,, but hyper might work if you work out the device problem.

[lincsat]

There's a MGCamd fix that's apparently working

[robbie67]

thankfully somebody got it to work i had to change 3 files 1 autorool key 1 softcam and 1 mgcamd file just changed the emu selection from evocamd to mgcamd and all came back

[satsmo]

There's a MGCamd fix that's apparently working

Yes its here http://www.digital-kaos.co.uk/forums...ireland-43813/

[macirl]

dbox in ireland (cam update)??

This worked for me on my dbox2 - on Commando 9 -in dublin west.

download from the following link:
Code:
DVB-UPLOAD v.1.6b

Only used the following files

Used mgcamd - Put in location var\bin
and autoroll.key, Softcam.key Put in location var\keys
changed active softcam from evocamd to mgcamd
changed permissions on all ftped files to 755
rebooted


All channels back. Be aware there is a timelag from choosing channel to it finally appearing - about 40sec. May go to Commando 11 to see of this speeds up channel appearing.

[Dolphin 6]

All channels back. Be aware there is a timelag from choosing channel to it finally appearing - about 40sec. May go to Commando 11 to see of this speeds up channel appearing.

I have it running on Commando 11, 90% of the channels are OK with just a few requiring a slight wait, but it's more like 20secs than your 40secs.

D