sagem dbox ...hellllp

[emmpee]

hi was wondreing if any has any idea wots wrong..

i recently flashed my box with commando 10..got alot of channels then noticed commando 11 was out so i flashed that 1 instead now all i get is a frozen box...?
now box lights up and says kein system on at the bootom
cannot get connected thru the usual ways ..ifa,bootmanager,cuteftp...etc...
is ther any way it can be restored,rebooted from motherboard..i.e ...have tried arrow up and power ...also left it on all night on boot man II to see if it could connect but sadly nothing any 1 have any ideas...or is it locked up for good?....thanks

[ManofScience]

you will have to reflash using IFA. and yes, it will work if done correctly.


make sure you've got either the x1 chip or x2 chip version of the image depending on what your box is

[shaggy_s]

Had the same problem when i flashed with a 1x instead of 2x image.

you will be able to sort it using IFA with a null modem and crossover cable.

you may have to try a couple of times to get IFA to connect but keep trying and it will work.

there are plenty of tuts on this site that will help you out

[toxic_shj]

Unplug you box from the power; load ifa with the correct image and launch it. When it says ' waiting for box to reboot', then you plug your box and press up and down arrow. Keep trying if it doesn't work 1st time.

[emmpee]

thanks all will post babk later

[emmpee]

tried all above an more.......sigh......
still no luck
will keep searchin....cheerz