a little help for commando 11.3

[twobobs]

hi peeps

what a great image this is
only i have a little problem, very little...

if iam watching a channel and a new program starts
the info box comes up on the screen as if i just tuned to this channel.
also 1 min after the program starts it comes up too.
but not when it comes up on the start of the program
so its either when it starts or 1 min after

how can i stop this ? if i can?

thanks in advance

wee-willy

[Fergal]

I think its dbox,settings,misc settings,info bar and turn epg behavior to off then press home until you can save settings.

[twobobs]

thanks fergal

will give it a go

many thanks
wee-willy

[PaphosAL]

Yes, ze Germans seem to have finally gotten around to finishing off this feature, as previously- the 'Short' option didn't do anything, it was the same as 'Off'.

So do as Fergal says, if you don't want ANY form of pop-up when a new program starts: Infobar behaviour - Off (and Save on the way out).

Infobar behaviour - Short now gives a small Info box in the centre of the screen when a new program begins.

Infobar behaviour - Expanded pops up the Infobar when a new program begins (AL's favourite mode)

Cheers- AL

[Renwich]

Yes, ze Germans seem to have finally gotten around to finishing off this feature, as previously- the 'Short' option didn't do anything, it was the same as 'Off'.

So do as Fergal says, if you don't want ANY form of pop-up when a new program starts: Infobar behaviour - Off (and Save on the way out).

Infobar behaviour - Short now gives a small Info box in the centre of the screen when a new program begins.

Infobar behaviour - Expanded pops up the Infobar when a new program begins (AL's favourite mode)

Cheers- AL

and mine

[finche10]

Hey guys,

Sorry to hijack a thread, but it was named appropriately! I've recently installed Commando 11.3, and am only getting the FTA channels. I've had a read through some guide and I'm getting the impression that I need to do something with keylist etc. However I've never done it before the previous images I've used have had this setup already. I've enabled the tuxbox commander by downloading it to the box and I've set up the network settings so I can FTP to the box. After that I'm out. Any chance of a PM telling me where I'm going wrong?

Thanks in advance,
Finche10