hi flashed new image to sagem dbox get epg but black screen i have transfered the keys and everything it is still black screen any help pls
-
-
Wot image ,do you have on now mate
Push blue button and set your location for Scanning .......PaulIf your Happy with the Help push the Thanx button
PAUL -
i did that but all chanels got deleted i hhave sagem dbox i flashed lincast full image now it wont boot up so i am going to put blade image through null cable see if it will boot up againComment
-
Make sure you are useing the correct Chip type image
Sagems ,can be 1 x or 2 x
If you select the wrong one
It wont boot ,As you may have just found out
Ifa is the way to go Now ............PaulIf your Happy with the Help push the Thanx button
PAULComment
-
how can i tell if if it 1x 2xComment
-
also what image should i use i had a blade xenefanComment
-
Run software called (Flashcheck)
Shine a light through the lid
Or wipp the lid off and have a butchers
If you have just flashed,and the box wont boot
Try flashing the oppisite image With IFA and a cross over cable
Does it say Kein system in the LCD................Paul
blade xenefan is a class image mate ,you wont go far wrong there
Have a good read up ,befor you jump in
It may save you time in the long run.Last edited by plasterer; 5 January, 2010, 13:11.If your Happy with the Help push the Thanx button
PAULComment
-
yes it says kein system at the frontComment
-
Flash it again using IFA and the correct image. If you flashed 1x last time use 2x this time and vice versa
THE TRUTH
The Hillsborough Independent Panel. 12/09/12
Today's report is black and white.The Liverpool fans were not the cause of the disaster.
The panel has quite simply found 'no evidence' in support of allegations of 'exceptional levels of drunkenness, ticketlessness or violence among Liverpool fans' and 'no evidence that fans had conspired to arrive late at the stadium' and 'no evidence that they stole from the dead and dying'.Comment
-
hi i am trying to flash using null modem as i dont have a cross over cable but when i connect using null modem thorugh hyper terminal it connects but i cat type anything inComment
Comment