getting free view channels but paying channels

[redthedog]

while doing this why would the connection keep failing?

[caznjie]

hi i cant seem to get the router to connect with the box
i have put in the ip and things as stated

[aftermath]

hi i cant seem to get the router to connect with the box
i have put in the ip and things as stated

what is the IP of your router , and the IP of your box ?

[caznjie]

hi my ip adress for my box is 192.168.0.24
but how do i get my routers ip addy ive don ipconfig /all but my routers dont come up

[aftermath]

type in your web browser

either

192.168.1.1

or

192.168.0.1

see if any of those work ?

if one of them does , change your box IP to either 192.168.1.3 or 192.168.0.3 ( 3 above that of your Router IP ) last 3 digits can be anything you want as long as there is nothing else on your Network with the same IP address

[smiffy_john]

just tried the image flashing assistant, as i couldnt make heads nor tails with going through comp ,
bought a dbox from germany , it was v*rg*n
that was flashed onto it , but i could only get channels 1234 ,
i decided to reflash as i wasnt getting anywere , now i have tried about
a dozon different images and still get no channels , ive set my location many times over but no matter what image i flash on i cant get any channels , some wont even find a transponder any help much appreciated thanks
,,,,john ,,,,

[MetMan]

just tried the image flashing assistant, as i couldnt make heads nor tails with going through comp ,
bought a dbox from germany , it was v*rg*n
that was flashed onto it , but i could only get channels 1234 ,
i decided to reflash as i wasnt getting anywere , now i have tried about
a dozon different images and still get no channels , ive set my location many times over but no matter what image i flash on i cant get any channels , some wont even find a transponder any help much appreciated thanks
,,,,john ,,,,

couldnt make heads nor tails with going through comp

does this mean u cant ftp.....i think u will need to transfer a file(s) to the img(s) to get it working...

[smiffy_john]

ok , an if u dont mind can u tell me how thats done , i thing ide need a talk through on that

[goofyden]

I've installed an x1 image instead of an x2, not i get keih sysyem error, i've tried a boot loader bu it was in german and couldn't understand the error messages, i've tried 2 different ifa's 1 old and 1 new but that won't connect....can anybody help?

[smiffy_john]

have u been on hallenberg site there u can dl the flash , and try a uk au image with a 2x image

[tosh2004]

how to install emu in lincat fta image?

[weezeltec]

very helpful and straight forward thanks

[kchakry]

Nice guidelines i will give a go today