Laky Sylus problemo

[kenny601]

Laky Sylus scan settings

--------------------------------------------------------------------------------

So I'm all set up with Laky Sylus with my srvs's and bquet's etc. I've set my location pressing the blue button.
I've tried umpteen different settings in service scan and I'm still getting no channels when I run a scan.

I've tried Scan mode's "Complete" and "One transponder" then putting in my EM frequency settings from my subbed box but still no channels.

Do I need to alter Modulation, FEC and NETID?

What am I doing wrong??
Im in east manchester do i need specific frequency and NETID

Many thanks in advance

[shaboy]

you shouldnt need to alter anything mate once the location for scanning is done,dont change netid or frequency are you sure your on a live feed? can you test the feed?

[kenny601]

LS Problemo

I know thats what I thought perhaps Virgin is down in my area,as it says successful transponder scan but gives me nothing.
Thanks anyway

[Fergal]

Turn fast scan off then red to save and do a slow scan see if that works.

[kenny601]

LS Problemo

theres only a scan buty on this image unless its somewhere I dont know.
Thanks though

[kenny601]

LS Problemo solved

Hi all,
I took splitter and scart off and put all back together and hey presto it scanned and worked ,so another lesson learned.
Thanks for help