re fxp

[chris31560]

hi peeps can anyone tell me if u can do a complete image flash onto my dbox using fxp coz i have been trying for about a week now with no joy, and if so could someone explaine to me how its done as iam a bit of a dumb ass , i can get as far as preping my comp, loading fxp, getting the comp files in the left window and the dbox files in the rite hand side but then i hit a brik wall, how do i get the image wot i wont on my box from the comp files to the box files, and even then wot do i do, any help on this would be great many thanxs,chris31560....

[johny48]

hi m8
make sure you have the correct chip image for your box
some info Nokias are all 2x images but sagems can be either 1x or 2x.
now
transfer the img to the tmp diretory of you dbox
do not power down the box now via your remote
dbox key Main menu scrol to services ok
software update or image update ok
flash one partition and always (With out Bootloader)
press ok and yes ok again to confirm wait for it and thats it

cheers johny48

[chris31560]

hi johny48, thanxs for that my box is a sagem x2 chip, but iam avin trouble transfaring the image from comp to temp folder cheers..

[mini]

explain exactly what you are doing and where you are getting the problem. The more detail the better somone can help.

[chris31560]

hi once i have started the fxp programm how do i transfare the image from comp to dbox temp folder,thanxs..

[Fergal]

Make sure you are in the /tmp folder on the box (right window) and in the left window right click on the image and choose transfer