Struggling For a week HELP

[Pigeo Toes]

Flashed new Image Commander 11.3.3 first rate Image, added Magic Keys

Re-scanned only getting F F V Channels, can any one help ?

[mickydibble]

Did you chmod the cams , if not you need to do it dbox side in FTP,goto var/bin/emu , and right click On cams,properties,attributes,change to 755. , and save on the way out

[Pigeo Toes]

Stuggerling

Many Thanks for your, reply, dont understand how to do what is mentioned.

With a Little more help I should get their

Its So frustrating

[redstripeu2]

Many Thanks for your, reply, dont understand how to do what is mentioned.

With a Little more help I should get their

Its So frustrating

hi,change your camds and emus in blue button on remote

[mickydibble]

In the magic keys folders you added to dbox there is var/bin /emu. In here the cams are right click on each cam,properties,attributes,and change the 655? To 755 and save on the way out,,,,!

[PaphosAL]

and Commando 12 is the latest in the illustrious Commando image family. With an Update to take it to revision C12.1.2 01 March 2010

All available here on D-K!!

[Pigeo Toes]

In the magic keys folders you added to dbox there is var/bin /emu. In here the cams are right click on each cam,properties,attributes,and change the 655? To 755 and save on the way out,,,,!

Done Exactly as you discribed, still not Up and running ?

[gizmo.1484]

Make sure your camd is switch on and that there is only one on by pressing the blue button then on extra menu then select softcamd then press on the camd to turn if on or off....

[Pigeo Toes]

Followed instruction by pressing blue button, cannot find extra menu mentioned to select Softcamds.

Can you point me in the right direction

[plasterer]

Message sent lad ...................paul

[PaphosAL]

Press Blue button for the Technical Menu, then dbox button for Extras Menu, then Red button for Softcams Menu.

If you see no cams listed, then you've sent them to the wrong folder. They MUST be in /var/bin/emu/

A common mistake for noobs is to send them to /var/bin/emu/var/bin/emu/ !! And as mentioned above, only ONE cam to be ON at any time, not two or more...

Cheers- AL

[donqam]

help

Hi,
I have ftp'd into my dbox and i nothing in my Var/bin/emu folder, where do i get the 'cams' from??
Thanks
Q

[Pigeo Toes]

Message sent lad ...................paul

Many Thanks Plasterer , waiting your responce to your Proposal, on Friday, we are in the same AREA

[Pigeo Toes]

Press Blue button for the Technical Menu, then dbox button for Extras Menu, then Red button for Softcams Menu.

If you see no cams listed, then you've sent them to the wrong folder. They MUST be in /var/bin/emu/

A common mistake for noobs is to send them to /var/bin/emu/var/bin/emu/ !! And as mentioned above, only ONE cam to be ON at any time, not two or more...

Cheers- AL

When I go in to Soft Keys selection Menu

It shows the following:

Back

Camd Reset when I Press the Red Button on Camd Reset

It says
"Please Wait Softcand is restarting:

[MetMan]

When I go in to Soft Keys selection Menu

It shows the following:

Back

Camd Reset when I Press the Red Button on Camd Reset

It says
"Please Wait Softcand is restarting:

you should see the cams on ur img in the softcam menu and choose 1, something like this

softcam.JPG

if not, u have added them incorrectly as Al has suggested: -

check ur /var/bin/emu folder

cheers