### New laky - sylas FTA image ###

[jfish]

If you copied your old keys folder it will still have the old roms in there,so put the new rom7 into the var/keys folder,and delete the old 10,and 11 roms.Make sure that when you go into the CAMD-CFG folder (blue button-file manager) That the AU option (auto update)is set to 02.and not 00.Set location,reboot,and hopefully all should be working.

Cheers,Kev.

done all that, the var keys I used was taken from a working AU Image

checking the process it seems like EvoCamd doesnt kick in at all as in the tmp folder I should see a EMM temp file with the necessary information, but this is never created

also so someone who can answer this, when I telnet to the dbox and do a ps - should I see the evocamd process active, cant see it at all. Therefore I suspect evocamd to be the issue here, where exactly on the image is the evocamd binary located

tried var/bin
var/bin/emu

cant see it

[teddy.work]

hi all, just downloaded the image (which is top notch by the way) put it onto my box but cannot connect to it. Went onto the box and got the ip address, put it in on the flashfxp and tried to connect but it wont. Any ideas?

Cheers

[bobsylas]

also so someone who can answer this, when I telnet to the dbox and do a ps - should I see the evocamd process active, cant see it at all. Therefore I suspect evocamd to be the issue here, where exactly on the image is the evocamd binary located

tried var/bin
var/bin/emu

cant see it

/bin/camd2

[jfish]

/bin/camd2

cheers

should I see evocamd as a process when I do a ps -aux on the box - on the dreambox I can see the evocamd process.

[bobsylas]

cheers

should I see evocamd as a process when I do a ps -aux on the box - on the dreambox I can see the evocamd process.

Yes mate give it a try

[mickydibble]

cool

[jfish]

cheers

should I see evocamd as a process when I do a ps -aux on the box - on the dreambox I can see the evocamd process.

Yes mate give it a try

had a look can not see evocamd as a process on the box

also their is no evocamd in the bin/camd as for the location of the evocamd executable

[bobsylas]

had a look can not see evocamd as a process on the box

also their is no evocamd in the bin/camd as for the location of the evocamd executable

It is named camd2

and it lives in /bin

[jfish]

It is named camd2

and it lives in /bin

ok got it now

is this camd just evocamd binary renamed

also what process should I see to ensure a EMU is running, only reference I can see is a process tmp/camd

[ukfun21]

i get a message thats says no channels found ??? am i doing this right ???

[bobsylas]

ok got it now

is this camd just evocamd binary renamed

also what process should I see to ensure a EMU is running, only reference I can see is a process tmp/camd

It is evo renamed
if you do a camd2 ps -aux
then change channel you will see what it is doing

[teddy.work]

can anyone help me and tell me how to put the keys onto the dbox and something else onto the scce part. i have no idea and have got this far from peoples help but no further. CAN ANYONE HELP?

[bobsylas]

can anyone help me and tell me how to put the keys onto the dbox and something else onto the scce part. i have no idea and have got this far from peoples help but no further. CAN ANYONE HELP?

keys go in /var/keys
use flashfxp or cuteftp

[Funnyguy]

hi quick question will i be able to use the image to flash by using the null modem cable method posted on this site

As i installed a image yet its in german so i was wandering if i could use this iamge to a get it o english (i had Commando before that worked fine...till the keys got blocked)

Thanks

[jfish]

It is evo renamed
if you do a camd2 ps -aux
then change channel you will see what it is doing

sent u a pm about this