how to update codes on sagem d-box

[ukmidsman]

hi can any one please tell me how to update the latest codes on to my box please many thanks jay

[portbhoy]

1. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.

You should now be looking at the files on the D Box.

2. Scroll to VAR and press ok, If you don?t see VAR, scroll to <DIR> & press ok, if you still don?t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen

3. When you find the VAR file and you press OK, scroll to Keys & press OK

4. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don?t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.

5. After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, 4 or 5 not allowed in the middle and numbers 1 to 9 at the bottom.

6. Now you need to scroll to the code that you are going to change.

7. When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor!
once done resart box and all should be well

[kasuku]

Thanks for this info.

[ukmidsman]

hi thanks for info portbhoy learnt how to change keys so thank you

[cjjthedon]

thank god some important info there now all i need is the ******* *****

[standarren]

download the bigmaq2 toolbar do a search on googleit has every think you will need mate

[cjjthedon]

thanks dude will try that now - respect!!!!!!!!!!

[cjjthedon]

ok tried that got some **** from there inputed them manualy stil no , ss , sm , etc still only fta - grrrrrrrrrrrrrrrrrrrrrrr