Help with applying the fix to Sagem Dbox2

[User-1]

I've followed the steps in "How to FTP the fix into the dbox for noobs" but keep getting the following message:

Status: Connection attempt failed with "EHOSTUNREACH - No route to host".
Error: Could not connect to server

My connection is ethernet to ethernet direct from computer to Dbox.

Any help is much appreciated!

[jfish]

I've followed the steps in "How to FTP the fix into the dbox for noobs" but keep getting the following message:

Status: Connection attempt failed with "EHOSTUNREACH - No route to host".
Error: Could not connect to server

My connection is ethernet to ethernet direct from computer to Dbox.

Any help is much appreciated!

r u using a cross over cable

whats the IP address of dbox and pc

the error message looks like a routing table therefore I suspect issue is with the IP address of the dbox - not being on the same subnet of the pc

[User-1]

Yes I'm using a crossover cable!

They are both on the same subnet!

255.255.255.0

[18fisher88]

try turning ur computer and box off connect crossover and null modem cable turn both back on start ur hellingburg uploader clik next till u get to pc is now ready to flash turn d-box off then clik ok and start box at same time hope this helps

[User-1]

The box is already flashed I just need to apply the fix.

Thanks for the reply!

[smoggie]

just wonderig if anyone with a working sagem dbox 1x could make a backup of there flash and post it on an external link

posted the same question a few times, looks like you need to spend some time reading the stickies and guides, do that and if you cant get sorted post your problem and help will be at hand

[rob6007]

r u using a cross over cable

whats the IP address of dbox and pc

the error message looks like a routing table therefore I suspect issue is with the IP address of the dbox - not being on the same subnet of the pc

the 225.225 is not the ip address it should be 192.168

[smoggie]

The box is already flashed I just need to apply the fix.

Thanks for the reply!

disable any firewalls, disable any other connections. go into properties of network card and click on configure>advanced>network & duplex(yours may be named slightly different) and select 10 half base and save, , if your box ip is say 192.168.1.100, then set your network card to 192.168.1.99 on the internet protocol

[User-1]

the 225.225 is not the ip address it should be 192.168

IP address is 192.168.100.20

the 255.255.255.0 was the subnet!

[plasterer]

You need 2 ips mate
One for your D box
And 1 for your network card.............Paul

[mickydibble]

IP address is 192.168.100.20

the 255.255.255.0 was the subnet!

your pc should be set to 1 less : 192.168.100.19 then,but are you familiar with ftp of files.?.m

[User-1]

disable any firewalls, disable any other connections. go into properties of network card and click on configure>advanced>network & duplex(yours may be named slightly different) and select 10 half base and save, , if your box ip is say 192.168.1.100, then set your network card to 192.168.1.99 on the internet protocol

Still no luck!!!

Help.........

[User-1]

your pc should be set to 1 less : 192.168.100.19 then,but are you familiar with ftp of files.?.m

I've got the IP's sorted but can't get the connection between box and computer!
I'm not really familiar with FTP's but it seems quite staight forward. I'm new to all this but I'm here to learn!

[mickydibble]

Still no luck!!!

Help.........

hi,i actually use 10 base full duplex,which always works for me,but thats on a nokia..dbox 2..

[User-1]

Just seem to be stuck in a rut!

Looks like binning the dbox and getting one of the newer boxes unless there is someone out there that can take me through this step by step!

I'm even toying with the idea of re-assembling an old computer with just XP and filezilla, then adding a network card!

All this just to apply the fix!