Please help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rockin2
    Newbie
    • Dec 2008
    • 3

    #1

    Please help

    After installing Lincsat.Beta7.25-FTA.1x.301108.img on to my Nokia Dbox2 it now freezes on boot up screen. With the words 'kein system' I think I've **** it.

    Any advice would be great. I'm a newbie so please be kind.

    cheers
    Last edited by Rockin2; 5 December, 2008, 01:33.
  • on_the_jazz
    DK Veteran
    • Jul 2008
    • 557

    #2
    Flash with null modem cable, network cable, and IFA

    Comment

    • Jaffa
      V.I.P. Member
      • Mar 2008
      • 1612

      #3
      Originally posted by Rockin2
      After installing Lincsat.Beta7.25-FTA.1x.301108.img on to my Nokia Dbox2 it now freezes on boot up screen. With the words 'kein system' I think I've **** it.

      Any advice would be great. I'm a newbie so please be kind.

      cheers
      You will need to use Image flash assistant (IFA) to flash the box again, it is now has no system on it.

      Did you mean to use the 1x program...have you a 1x box or did you flash it by mistake instead of a 2x, thats basically how kein system happens, wrong image was flashed.

      Its recoverable so dont worry about it.
      sigpic

      Comment

      • NUKEMALL
        Member
        • Dec 2008
        • 84

        #4
        sounds like you flashed the wrong chip image on to the dox mate .

        re flash using Image Flash assistant . if you used the X1 image use the X2 image .

        this worked for me and all you need is in the down load section (but use the image from the chatterbox toolbar ) wont say why .

        good luck

        P.S got mine going after doing the same thing about a year ago .

        THANKS TO ALL ON HERE
        Last edited by NUKEMALL; 5 December, 2008, 01:38.

        Comment

        • Derekwd
          Top Poster +
          • May 2008
          • 244

          #5
          You have flashed a 1x image to a 2x box m8, all nokias are 2x, you will need to re-flash it useing IFA image flashing assistant, have a look at the stickies for using this if your not sure, and make sure the image you use is a 2x.

          Derek

          Comment

          • Rockin2
            Newbie
            • Dec 2008
            • 3

            #6
            Cool, thanks for the advice.

            Where can I get a null modem cable from?

            Comment

            • Rockin2
              Newbie
              • Dec 2008
              • 3

              #7
              Originally posted by NUKEMALL
              sounds like you flashed the wrong chip image on to the dox mate .

              re flash using Image Flash assistant . if you used the X1 image use the X2 image .

              this worked for me and all you need is in the down load section (but use the image from the chatterbox toolbar ) wont say why .

              good luck

              P.S got mine going after doing the same thing about a year ago .

              THANKS TO ALL ON HERE
              Might be obvious but why use the chatterbox toolbar? and what is it?

              Comment

              • brummie
                Newbie
                • Jul 2008
                • 12

                #8
                Originally posted by Rockin2
                Cool, thanks for the advice.

                Where can I get a null modem cable from?
                Try maplins

                Comment

                • on_the_jazz
                  DK Veteran
                  • Jul 2008
                  • 557

                  #9
                  Originally posted by Rockin2
                  Cool, thanks for the advice.

                  Where can I get a null modem cable from?
                  Ebay is quite cheap:

                  DB9 Female DB9F 9 pin RS232 Serial Null Modem 2m Cable on eBay, also, Serial Cables, Cables Connectors, Computing (end time 01-Jan-09 19:29:16 GMT)

                  Comment

                  • Bravo111
                    Member
                    • Dec 2008
                    • 69

                    #10
                    ?9.99 from Maplins, female to female connection required i believe.

                    Comment

                    Working...