help

[linto]

hi flashed box with firmware couple of days ago worked fine today box went of when i turn it on just says no signal cant select channel its blue box anyone help many thanks

[daveb1111]

flash again and power scan, if this dont work check cable is still connected at main cab on street , heres how to check, plug cable into tv ant, scan tv to see if it pics up some chans, it should act like and ant if connected if it dont pick up chans then you have been disconnected at box, try it on a friends cable that you know works. ....dave

[linto]

hi tryed reflashing box same problem remote wont work just saying no signal if connection lost channels would still turnover my signal split of broadband any help please

[daveb1111]

try put in codes by remote, you will find codes at KEYMASTER , this should work till prob is solved , when got codes press menu then yellow button and enter codes you got.

[mod2000]

Just done same to me done factory reset works fine now

[linto]

the remote will let you turn the box on and of thats it wont change channel or anything else

[mihnd]

hi folks over at my mates he has a blue box and its jammed with four lines on display,also the remote wont work[yes we changed the batteries]to let him do a re scan or factory resest,he is also gettiing a cable signal to his cable box,any ideas guys p,s we are in the edinburgh region

[mod2000]

You both will have to put update on again

[mod2000]

Ps make sure you use clone safe version

[mihnd]

cheers mod, ihave tried a few times now to put the updates in again however we are stuck,when we click on download we are left with a message saying the receiver was not detected,what am i doing wrong

[linto]

on the rs 232 cable make sure you screw it to pc and box with the screws happened to me few times done this worked mint

[mihnd]

your a star mate that done the trick thanks

[linto]

hi does anyone have clonesafe for blue box with the loader built in downloaded firmware downloaded dnupman cant get them together to flash the box any suggestions please

[mod2000]

Use the DnupmanYou need an older version of dnupman try here 4shared - free file sharing and storage - share folder - My 4shared this should ley you load update.use the DnUpMan v4 red.exe

[mod2000]

Did this work or are you still stuck