no or bad signal

[EurovoxK]

Last week I had the issue whereby the picture was breaking up and it was un-watchable. Someone suggested that allinone booster should fix that or try changing frequencies.

I tried both the suggestions. Bear in mind before I connected the booster it was all working fine. Changing frequencies wasn't a good idea either cos it meant other dependable channels got worse. But the issue was resolved itself.

The Sunday just gone 28th .. I was having SAME ISSUE. picture breaking Actually worse than that. It has started saying "No or Bad Signal" ??

Here are the things I have tried.
I did the deep scan twice already, fast scan and user installation once each.

Flashed the box with the latest firmware; with the autofix. My last scan was at 1800 the scan went on for a while and TP found some frequencies after that the TV and RADIO channels were sorted. I only got 80 channels and 11 Radios. That seemed suspicious cos when I bought the box and did the scan it found 250 channels I went on anyways. But now it just got worse, I now get a message "No Channel" to which I know I should download the CDF file but I should n't have to cos I got the autofix anyways that should have fixed the issue regardless of CDF.

But guess what I get back to the same page where i started "no or bad signal" some channels break up as well.

So can it be the V*M?
Can it be the cable?
or ultimately can it be the box itself ?
Or should i just wait little longer for everything to fix itself again....

Please suggest.

Happy New Year to everyone.

[nenene]

aerial

try redoing the aerial

[camelv]

this defo sounds like an arial connection problem

[telecom69]

Check your cable supplier set top box,this will determine that the signal is ok ....

[RustyMG]

I like to think I know what Im doing when flashing boxes, building pc's, setting up routers etc etc, and I had similar problems to yourself - once re-flashed, I couldnt get the normal 36 transponders, thus hardly got any channels.
In my stubbornness to believe I could possibly do anything wrong (no sniggering peeps!), I had failed to notice that I had the f connected half hanging off the cable going into the eurovox after re-flashing, hence a very bad signal, and then when I fixed it, I put it into the tv aerial input socket by mistake, giving me no signal at all.
Now, ok, I was having "a bad day", but, these almost embarrasingly simple mistakes CAN be made, so double check the basics 1st.
Then, piggy back your original box with a splitter.
Firstly, it means if they do a bounce-back, your original box will tell them its happily connected and they wont think your viewing for free, and secondly, if that has a perfect signal, you know the problem is eurovox related.
Hope this helps!

[EurovoxK]

Thank U all for your replies.. Annoying as it may sound ..it has fixed itself ...!!! I gave up last night at 2000 hrs, checked in the morning and its working... Exactly ...I am thinking what the hell. !!

[EurovoxK]

try redoing the aerial

By that I understand the cabling. The feed coming out of the wall to the TV including splitter ?

Is that right. ?

[EurovoxK]

this defo sounds like an arial connection problem

And what might be the solution to it ?