digivox help"

[ranger]

can anybody help me , i just put new firmwear in to the digivox , IT downloaded it ok , when i turned it back on , it was stuck in CHLD lock , and i cant get it out if that mode , any ideas welcome , ranger... ,

[satsmo]

Which model was it and what firmware did you use? Its either a bad flash or wrong firmware used.

[cactikid]

bad flash are u using correct firmware for ur box,is it silver or black? reload the loader with file,box powered off press download and power on box,do not wait for box to bootup first or it wont work.might work 1st or 10th time keep trying.

[satsmo]

Best wait for an answer first regards which firmware version was used.

[cactikid]

i see ya pipped me at the post ,a lot of people not double checking what box and firmware to use.

[ranger]

thanks for your help lads , its older silver digivox . two years old , i flashed it with (digivox v1220) then i tryed v4200) im not sure what is the right firmware, for it , but i flashed it last year and it worked fine ,i have tryed to download the file as its starting up , but no luck yet , its just that im not sure what , downloader " to use , or what firmware to put into it ? thanks again for your time and help , ranger

[satsmo]

This is the latest firmware for your model Digital Kaos - Downloads - Digivox V4300 and downloader 10 is the correct loader, which you must be using.

You can get it here you may a corrupt loader, so worth a fresh install.

Carry out a factory reset, turn off the box from the power for a minute and then back on. Keep trying a hard boot flash as said it will work eventually.

[cactikid]

if chdl is on front off box u cannot do anything but a hard boot,loader and filev4300 in and ready,box powered off,press download and power on box at same time to force flash to take.wait for box to reboot when finished.it might work 1st time or 10th time keep trying.
problem was caused by wrong firmware not suitable for ur box that it is why we need all info to give out correct info,all different boxes have their own firmware.

[wernley]

lads u are good

[ranger]

thanks again for your help , i have downloaded the (downloader 10) but i cant find the v4300 , firmware from the link page , that it takes me to , can you tell me how i download v4300? ranger

[satsmo]

Its in the link I gave you above. I have just tried it.

[ranger]

hi satsmo , i konw about the link that you gave me thanks for it but when i click on it , it takes me to the windows file assocation "when i click on "windows live search" thats takes me to a list of web pages of (file extension bin ) i have open some of them but cant find v4300 " sorry about all of this , but i cant find the bin file in there , thanks again ranger ..

[cactikid]

did u click digivox v4300 link that works.

[satsmo]

You save it to your desktop, open the loader, browse for the file select it as app and click download.

[ranger]

i have downloaded the v4300 file to a memory sitck and the downloader 10 to the same stick , because my new pc , dont have a rs232 port on it ,but the old laptop im useing has, its flash ok and progress bar go all the way over, and it says (download complete!) the digivox boots up on turn on , , then f-oo , then UADL f-00 , and then back to CHLD < i have tryed this 15 times so far hanks again , ranger