Eurovox Max Blue Set up

[konatist]

i got a euro vox last year when i was waiting for me dbox coming i want to put it another room it was working on the blue sotware. since there has been a update last i flashed it with the new blue softwre from the downlod section but when i do a scan it gets nothing the screen jst says no signal arrrrgggghhhh where am i going wrong

thanks in advance lads n lasses

[DW190]

i got a euro vox last year when i was waiting for me dbox coming i want to put it another room it was working on the blue sotware. since there has been a update last i flashed it with the new blue softwre from the downlod section but when i do a scan it gets nothing the screen jst says no signal arrrrgggghhhh where am i going wrong

thanks in advance lads n lasses

Exactly what it says.

Your signal from the cable feed is not getting through.

Have you plugged the cable into the correct socket? or are there any bad connections in it.

[konatist]

i put it in the one that says ant
i tried the others to see if it mad a difference the cable is fine its the same one i use for my dbox and it works fine the last time i had it working i had to flash it with the ble software tehn put 2 lines of code in does this still apply

[Spiderpig2]

No box will work when you change rooms unless it is the only one on the system. If you have any splitter fitted remove it and connect the box directly. Once it does tune in you can then put the splitter back.

[konatist]

it is the only box in the room and its not on splitter yet its from the main room so since the end of november update should i just need to flash it with a blue ? or is there something else i need to do

[GENERALG]

hi i have the eurovox blue my cable is plugged into the RF IN not ANT

[ruudvandan]

i put it in the one that says ant
i tried the others to see if it mad a difference the cable is fine its the same one i use for my dbox and it works fine the last time i had it working i had to flash it with the ble software tehn put 2 lines of code in does this still apply

thats why it doesn't work, ant is for your normal tv aerial, like General G says it needs to go in the RF

[konatist]

cheers lads ya are right ha ha so put it in the right socket did a scan picks up 200 + channels but only e4 works none of the rest and i get various messages when i go to other channels
like
unknown
up datesing code

what else can i do

again thanks in adavence

[ruudvandan]

cheers lads ya are right ha ha so put it in the right socket did a scan picks up 200 + channels but only e4 works none of the rest and i get various messages when i go to other channels
like
unknown
up datesing code

what else can i do

again thanks in adavence

if keeps saying updating code, leave for a few mins then it should update them. If it doesn't eventually update itself then you probably have old firmware on it.

[konatist]

its the new blue one from the download section

[konatist]

alll working now thanks form help from another post