Hi guys, i have followed a tutorial and jtag'ed my ex5000 pvr, now after jtagging the red light comes on with 4 ---- on the display, then the lines circle half way round the display then this starts all again back to the red light. I tried to flash it with my normal ufl loader, it wouldnt find the com port, so i selected com one and it said waitng for a responce, so i powered off the ex5000 then back on and it started to flash. It downloaded, but failed and the box began to do the above. Is there another bin file or something i have missed when jtagging, as now its back to life, but not properly.
when it went to write, the dnld on the display was flashing until it got to about 40/50% then it stayed on solid for a while, then after about 20 seconds it started to flash dnld again for about 10 seconds, then it went off and the box reset again and went in to the loop i described above while the loader was still saying writing
Any help would be great, just seems its either the jtag method I used, or bad tsop or just something weird
I believe mine to be a clone and it went down a few weeks after updating to the DarX firmware, it started to freeze up a few times a week, so i switched it off from the back then back on, did this a few times, but one time i switched it back on and nothing
Im hoping its the way i jtagged thats casuing this, does or can someone just reply with a basic step by step guide of how to jtag this box, as im thinking it must be this if someone above got theirs working using the same tsop
-
-
-
EX5000 clone TSOP file tested and working
Box completely dead no lights after updating with Feb UFL no sort, jtagged with jkeys and working again.
(thanks to chic @ wizard)Leave a comment:
-
Feb no sort UFL is kiling EX5000 clones, no lights or stuck in boot up.
The fix is to Jtag, just got the file wizard mods (thanks to chic)
JonLeave a comment:
-
i have 3 bricked ex5000 pvr
i have 3 eurovox ex5000pvr. from 2 diffent web sites
updated with darx fw new one.
i had all the channels for about 4 days then the boxs all hanged on me i can hear the hard drive whirring but no front led no memu. so i tryed then reset buttom on motherboard did not work??then tryed j taging with black (fw) front led powerd up but had green lights going clock wise but thats it. is there a .bin file for ex 5000 pvr sky max 2 or j keys i very sure there not clones..
any help lads ??
im now using my box supers no problems... i had the eurovox about a year??Last edited by DEADARM; 8 April, 2009, 21:54.Leave a comment:
-
Hi m8,
I have got standby light but that is all...
I also am having this same problem !!!
What the hell is going on ???
Looks like that latest software is V naughty so beware to all as I think that it can do serious damage...
I have tried everything from rs232 serial to USB connections. It will detect the EX5000 as I keep getting "waiting for the response of your receiver".
Can anybody out there solve this issue ?
Hers hoping anyway folks.
Cheers,
pj4dLeave a comment:
-
eurovox ex5000pvr dead ?????
hi,
i am a complete novice at this.
i just bought a eurovox ex5000pvr.
turned it on and done a ower scan,but found no channels,then realised that box had to be flashed first.
my mate flashed it for me.
plugged it in and front panel was working normally.
turned it off to install cables and now the front panel is completely blank. not even a standby light.
i can hear the hard drive whirring when the power is on,but when i pull it out there is complete silence.
even tried leaving it for an hour and trying again,but still nothing.
any help would be appreciated
Leave a comment: