ex5100 pvr lost channels help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • chrisully
    Member
    • Feb 2009
    • 40

    #1

    ex5100 pvr lost channels help

    hi i have got a eurovox pvr ex5100 i have virgin net and run through a 2 way spiltter and a yellow brock amp. i started to get bad signal on a few channels so i updated channels and no lucjk the same. so i did factory reset and scanned again. half channels missing so i factory reset and did a direct link to box got 28 percent signal and 20 channels. so i did reset and just put box through amp and getting no channels on scan. any one help

    chris
  • majpat0
    Member
    • Dec 2008
    • 44

    #2
    hi try this plug in the box at the main feed do afactory reset then do a power scan you should pickup all channels then move it to the other room and see make sure the cable ends are properly secured

    Comment

    • HiTeck
      V.I.P. Member
      • Oct 2008
      • 996

      #3
      You could also try a deep scan.

      Comment

      • camelv
        V.I.P. Member
        • Nov 2008
        • 1202

        #4
        aftnoon ht ,were u been.





        sigpic
        its the stuff we think we know that stops us all from learning

        Comment

        • HiTeck
          V.I.P. Member
          • Oct 2008
          • 996

          #5
          Busy as you well know

          Comment

          • chrisully
            Member
            • Feb 2009
            • 40

            #6
            Originally posted by majpat0
            hi try this plug in the box at the main feed do afactory reset then do a power scan you should pickup all channels then move it to the other room and see make sure the cable ends are properly secured
            i have done get 8 perecent signal
            stressin me out
            net and phone work tho perfect

            Comment

            • chrisully
              Member
              • Feb 2009
              • 40

              #7
              Originally posted by HiTeck
              You could also try a deep scan.
              also done deep scan sounds like vm turnd off tv. i dont subscribe to tv but may have to get basic package so they turn on. im going to go my dads and see if can work their if so i think that is the problem

              Comment

              • chrisully
                Member
                • Feb 2009
                • 40

                #8
                Originally posted by majpat0
                hi try this plug in the box at the main feed do afactory reset then do a power scan you should pickup all channels then move it to the other room and see make sure the cable ends are properly secured
                done that no luck mate gutted if cant get work wanted to watch boxin

                Comment

                • HiTeck
                  V.I.P. Member
                  • Oct 2008
                  • 996

                  #9
                  Originally posted by chrisully
                  also done deep scan sounds like vm turnd off tv. i dont subscribe to tv but may have to get basic package so they turn on. im going to go my dads and see if can work their if so i think that is the problem
                  Sounds like a good place to start best of luck, if its still not working after come back and we will help you out .

                  Comment

                  • chrisully
                    Member
                    • Feb 2009
                    • 40

                    #10
                    Originally posted by HiTeck
                    Sounds like a good place to start best of luck, if its still not working after come back and we will help you out .
                    ok thank you for the help ill sehow i go and post back on here tomoz

                    Comment

                    • chrisully
                      Member
                      • Feb 2009
                      • 40

                      #11
                      Originally posted by chrisully
                      ok thank you for the help ill sehow i go and post back on here tomoz
                      strange i scanned at my dads and put back at my house now everything wielrd

                      Comment

                      • HiTeck
                        V.I.P. Member
                        • Oct 2008
                        • 996

                        #12
                        I presume at your dads it was ok? and at home how was it weird, try to explain more.

                        Comment

                        • chrisully
                          Member
                          • Feb 2009
                          • 40

                          #13
                          Originally posted by HiTeck
                          I presume at your dads it was ok? and at home how was it weird, try to explain more.
                          sorry mean was wierd that woulkd no csan at mine but did at my days. all channels came up great picture and works same at my house too now. must have been vm or something. just happy that can watch the boxing tonight. thanks all for your help this sire rocks

                          Comment

                          Working...