jtag eurovox ex1000sl

[harrylasmith]

is there any software out yet to jtag a eurovox ex1000sl got jtag but no software

[chic.]

i think you can use jkeys but you will need the tsop from another working ex1000

[harrylasmith]

jkeys ? what r they

[satsmo]

You look like you know your way around downloads you will find them and some instructions in there.

And yes you can get the bootloader from a working TSOP as has been done with many other models.

[chic.]

it's the software you need to jtag your box. here it is there is a tut by sunrise somewhere

[harrylasmith]

thanks for that info i'll give it a try

[chimpy07]

hi i know this threads bit dated but could someone tell me where the vcc point for clip is on the ex1000sl?? if any 3.3+v is ok then can anyone offer any help why jkey detects device id 0x00000000 please or offer pointers what im doing wrong, sky_max_up also says the same, im using buffered jtag from tmc. thanks

[SAJ1976]

can anyone please tell me what JTAG kit I need for a eurovox 2006 and where I can buy it from, any tutotorials for this would be much appreciated, thanks in advance.

[TomTit]

hi i know this threads bit dated but could someone tell me where the vcc point for clip is on the ex1000sl?? if any 3.3+v is ok then can anyone offer any help why jkey detects device id 0x00000000 please or offer pointers what im doing wrong, sky_max_up also says the same, im using buffered jtag from tmc. thanks

Put the croc clip to 1 of the 2 diodes on the main board, try 1 first and if don't connect then put it to the other diode.