If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
hi just got eurovox max blue worked fine upgraded of comp. couple of times great next time upgraded went dead (still some life get green light wen switch on but goes of tried reset nothing) new user dont know much
try reflash m8 if that dont work check the c14 capacitor on the psu board inside the box to see if if is swollen on top or leaking .
download this m8 and have a look .http://www.digital-kaos.co.uk/forums...placement-666/
sigpic
its the stuff we think we know that stops us all from learning
try reflash m8 if that dont work check the c14 capacitor on the psu board inside the box to see if if is swollen on top or leaking .
download this m8 and have a look .Digital Kaos - Downloads - c14 capacitor replacement
thanks for help seems to be working fine now think i had on the wrong setting when trying to flash anyhow thanks a bunch
Hi,
I was just wondering if somebody could please help me. I have had a eurovox max (blue box) for a while now, was watching IT V and the box froze (which it usually did on IT V) so pulled the power cable from the back of the box to plug back in as i usually did. However, box just went off and now cannot get any picture. The green signal light on the front of the box is not coming up and i cannot get any channels at all. The box will turn on, but it just reads '30' and cannot change channels.
Could anybody please help me.
Thanks
disconnect your scart
connect some coax cable from the TV / VCR socket of the eurovox to the TV
tune your telly to the VCR channel where you will get the 'enter pin' screen
using your remote enter the master pin which is 1004.
go to menu and clear data, then do a factory reset.
plug your scart back in and do a powerscan as normal or you may have to reflash the box
Comment