Eurovox EX1000sl

[tannedman]

Hi All

I bought a Eurovox EX1000sl from a company called Farrango , i just cannot get it to load any channels at all , i have read through this site and tried the things people mention but it still comes up with the same result which is no channels .

Would appreciate some help

Alex

[badapple]

Have u manage to load the latest softwa*e successfuly?

[tannedman]

Leads

I have not loaded any software , i have a laptop and the leads that the company supplied with does not fit onto my laptop ,the lead seems to have the same 9 pin adapter on both sides ,i think the are male fittings and my laptop needs a female .

Thanks Alex

[badapple]

There is your your problem m8.
The box u have, has only the "free to air" softwa*e.
U will have to get the correct cable, then update the box with the correct softwa*e, then u will be able to pick up all the channels.
Have a look here for the cables u will need >http://www.digital-kaos.co.uk/forums...-eurovox-9786/

[tannedman]

Thanks i will try that and see if it works.

Thanks Again Alex

[tannedman]

Here i am again , i got the lead L71BT and it downloaded fine , i tried to scan to channels and at the end it still said no channels loaded , on the front it comes up tp:000 what does that mean and am i supposed to plug in the RF in the normal aeriel lead or the sky lead when i am scanning ,please i still need help here

Thanks Alex

[badapple]

make sure the incoming cable lead is plugged into the RF IN behind the box.
After u have loaded the softwa*e, do a clear data/factory reset. And before scanning you need to enter the correct symbol rate for your area m8.

[tannedman]

Just checking is there only 2 symbol rates as i am in north london .

Thanks Alex

[paegraham]

i am new

I have ordered a Eurovox EX100SL I think it might be a clone, as I have bought form Bubble Supplies. Is there any firmware I can put on this to get good channels. I live in the Merseyside Area.

[badapple]

Just checking is there only 2 symbol rates as i am in north london .

Thanks Alex

Yes m8, try both 6887 or 6952, it will not do any harm to your box.

[badapple]

I have ordered a Eurovox EX100SL I think it might be a clone, as I have bought form Bubble Supplies. Is there any firmware I can put on this to get good channels. I live in the Merseyside Area.

M8, it u are sure its a clone, then return it, you will be better off in the long run!

[paegraham]

ok, where do you suggest I buy one from please.

[badapple]

ok, where do you suggest I buy one from please.

Have a look here m8, theo only sell originals>Skywonder Ltd

[tannedman]

Hi again its the pest ,tried all that changing symbol rate as well ,i tried updating channels and a sreen says no transponder to scan what does that mean .

Thanks Alex

[andy4]

I have ordered a Eurovox EX100SL I think it might be a clone, as I have bought form Bubble Supplies. Is there any firmware I can put on this to get good channels. I live in the Merseyside Area.

hmmm i didn't no the EX1000SL had been cloned