keymaster working or not??

[noname]

is keymaster working?
i enter the keys from keymaster *last updated 79days ago*
i enter my provider code and the channels dont open.
i use VM as my provided but for the keys i used TW..is this right? i need to open the channel tonight to watch a lvie event. plz help

[chic.]

if you are in a tw area use 5a 01 and go to menu ,language settings, ok , type 1968 make sure that the emulation is enabled

[noname]

did that mate but still no luck. i added new keys 2 different ways aswell so it has to be the keys are old. im using in line 1 and using 00 next to it. is that the correct key for line 1? if it is correct il post line 2 aswell to make sure its all right. but im sure the key is wrong becuase i entered the keys, provider etc etc all correctly

[Fergal]

I think you should edit your post as posting keys is not allowed also why dont you just flash the au fix on thats in the sticky as there is no need to keep doing what your are doing.

[chic.]

the keys are correct but you dont type 00 .00 is line 1 and 01 is line 2 now go back and edit out the keys in the post before you get banned are you sure that you are in a tw area if you are not sure try all the keys with the correct provider no ntl is 5401 and c&w is 5c01

[noname]

ok done, didnt know u cudnt post keys..only posted 1 part of it neway. i have it as 00 and 01 already. i got no idea why it aint working then. i cant flash my box cus my cables broke

[chic.]

did you have all the channels b4 have you got all the fta channels bbc1,2 itv ch4 and 5 i had a look back at your posts and it dos'nt say, try a power scan.

[noname]

i have my box flashed already but a few channels are no longer working, dmax, e4+1, s** sport* 3 etc etc. i need a certian channel to watch wrestling tonight but the keymaster just wont work i have tried tw, cw and ntl and none work at all. i pressed menu and yellow, entered the provider id then the keys. so i have no idea why it wont open the channels

[mtv1]

down load bigmaq toolbar 4 latest keys it sounds as you have to reflash though

[noname]

i have the latest keys already though they have been confirmed as the newest ones. i will flash it as soon as i get my cable but i need it working for tonight or im gonna miss wrestling

[Fergal]

Have you tried entering them in the 1968 menu and check the emu is still enabled
also might sound daft but you are putting in zero's if there are any and not the letter o

[smoggy]

you say in post 8 that your box is flashed already, if that is the case then you don't need any keys as it should auto update.
if it is only a couple of channels that are not updating (or is it all the paid for ones) then they could have moved to a different frequency, do as chic as already suggested, powerscan.

[noname]

have entered in 1968 menu yeah mate and it is still enabled. i have the old firmware which is autoupdate but i have a few channels not working. i will try a powerscan though thanks