If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
turned on the box and it stuck on one channel would not turn off .so i had to switch off at the back now no power to it nothing ..
anybody help pklease....
take the top off (whitch will invalidate the guarantee) and see if any of the caps on the power board have blown or are bulging if all are ok press the small micro switch to reset the box
ok dose the box get warm when it's left on for a while if not then we can take it that there is no power gowing through it so if you are shure the power lead is ok and the fuse in the plug is ok then 1 of the caps must have blown is there any way you can check them ie a meater or a neon screwdriver and make sure you switched it back on at the back it may sound daft but you would be suprised how many people do it
Comment