eurovox max v

[jubblyray]

please help i`m new to all of this , can someone point me in the direction to identify my box to see if`s a clone , dont want to brick it ! any help would be appreciated
cheers ray

[badapple]

Have a look through the vents for a silver metallic box over the processor.>http://www.digital-kaos.co.uk/forums...one-clones.jpg

[jubblyray]

have taken lid off and the picture is different to mine any more ideas
cheers ray

[badapple]

Can you see a silver heatsink box on the main board over the processor? If not you should be OK.

[jubblyray]

no heatsink , which firmware to use please ?
cheers ray

[chic.]

Can you see a silver heatsink box on the main board over the processor? If not you should be OK.

Hi m8 i think that is for the ex5000pvr its a eurovox max he has got this may help
http://www.digital-kaos.co.uk/forums/downloads/guides/29/eurovox-spot-difference-208/

[jubblyray]

well going by the tuner length on the board i either have a red or black box any more suggestions for fimware
cheers ray

[chic.]

if its a eurovox max v then its a black if you are sure its not a clone then use this Digital Kaos - Downloads - eurovox max firmware

[badapple]

Sorry m8, before you load any firmware, you need to make sure which box you have, look here for a idea>http://www.digital-kaos.co.uk/forums...firmware-9787/

[jubblyray]

well my head is spinning a bit but according to the difference guide i either have a red or balck box , is there any other research i can do before flashing thanks in advance
ray

[chic.]

well my head is spinning a bit but according to the difference guide i either have a red or balck box , is there any other research i can do before flashing thanks in advance
ray

if it says max v on the front and is black then its a black box if the screws inside on the board dont have red varnish on them then its not a clone flash with eurovox max v 1/12/08

[jubblyray]

yes it`s black but 3 screws have red varnish on them how many permatations are there ?
cheers ray

[chic.]

yes it`s black but 3 screws have red varnish on them how many permatations are there ?
cheers ray

are the wires all screwed up or in a ribbon are the caps on the power board green or black dose it have a silver scart cover or a black one is the tuner the full length of the board

[jubblyray]

the tuner is not the full length of the board, silver scart cover ,the caps on the power board are black ,all wires are screwed up not a ribbon cable
cheers ray

[chic.]

well m8 looks like you have a clone i dont think there is a clone safe firmware for that box you can put the keys in manualy