Product Description
The EX1100 is an updated EX1000 with the addition of a USB connector and PVR facilities. Externally it?s identical to the EX1000 with the USB connector on the side.
The scan performs similar to the EX1000 with you having to set the SR for your area, the auto sort now generates 12 favorites groups named to match the VM favorites? and for me now catches most current channels into their correct groups. Within the groups the channels get stored in alphabetical order. The editing favorites on the box is now a little fiddly with having 12 favorites and only 4 color buttons to allocate the groups, you need to press the FAV button to scroll through 3 groups of 4. I?m told a PC based editor (like Voxer) will be available soon, they are also working on proper network scanning like the Kryptview and D-Box.
In the main menu, going into the REC section gives you access to the PVR Setting, here you can switch the time-slip on and set the size of the time-slip, unlike previous boxes, the EX1100 permaneN*ly time-slips when a recording device is connected and the facility is switched on, be aware though that this does slow down the channel change considerably as it has to stop recording before it changes channel. The REC section also has the USB information, format and access to the library. The EX1100 records in standard .mpg format to play back on any PC, this has the advantage of you being able to play back .mpg files from your PC on the EX1100, it also plays back MP3?s
The Firmware is FTA (Free to Air) by default on our receivers.
If you get the Audio Voice over, pressing Green will allow you to select the alternate audio channel.
In the Tools section of the menu is the upgrade by USB application. From here you can upgrade the firmware- of course FTA still, load channel lists and also dump channel lists and dump K*yfiles to USB.
Specification:
1. Tuner & Channel <Digital Part>
Optional Antenna In/Loop-Through IEC connector Female, Male
Input Frequency range 51MHz to 858MHz
Signal Level range -20 to 20 dBmV
RF Impedance 75 oHM
QAM Demodulation 64/128/256 QAM
Symbol Rate 1.725 to 6.952 Ms/s
2. System & Memory
Main Processor Ali 3329E
Flash Memory 2 Mbytes
System Memory 16 Mbytes SDRAM
3. MPEG Transport Stream & A/V Decoding <Digital Part>
Transport Stream MPEG-2 ISO/IEC 13818 Transport Stream Specification
Profile Level MPEG-2 MP@ML, MP@HL
Aspect Ratio 4:3, 16:9
Frame Rate 25H for PAL
Teletext Through VBI
Audio Decoding MPEG Layer I & II
Audio Mode Single channel/Dual channel/Joint stereo/Stereo
Sampling Rate 32, 44.1, 48kHz
4. A/V & Date In/Out (Each In/Out optional)
TV SCART Output: RGB, CVBS, Audio L/R with Volume control
VCR SCART Output: CVBS, Audio L/R
Input: RGB, CVBS, Audio L/R
SPDIF Output: Digital Audio OPTICAL
USB SIDE X 1
USB 2.0 HOST Connector: USB A TYPE
Current Consumption: Max. 500mA
Data Interface RS-232, Bit Rate: 115,200baud
Connector: 9-pin D-sub male
The EX1100 is an updated EX1000 with the addition of a USB connector and PVR facilities. Externally it?s identical to the EX1000 with the USB connector on the side.
The scan performs similar to the EX1000 with you having to set the SR for your area, the auto sort now generates 12 favorites groups named to match the VM favorites? and for me now catches most current channels into their correct groups. Within the groups the channels get stored in alphabetical order. The editing favorites on the box is now a little fiddly with having 12 favorites and only 4 color buttons to allocate the groups, you need to press the FAV button to scroll through 3 groups of 4. I?m told a PC based editor (like Voxer) will be available soon, they are also working on proper network scanning like the Kryptview and D-Box.
In the main menu, going into the REC section gives you access to the PVR Setting, here you can switch the time-slip on and set the size of the time-slip, unlike previous boxes, the EX1100 permaneN*ly time-slips when a recording device is connected and the facility is switched on, be aware though that this does slow down the channel change considerably as it has to stop recording before it changes channel. The REC section also has the USB information, format and access to the library. The EX1100 records in standard .mpg format to play back on any PC, this has the advantage of you being able to play back .mpg files from your PC on the EX1100, it also plays back MP3?s
The Firmware is FTA (Free to Air) by default on our receivers.
If you get the Audio Voice over, pressing Green will allow you to select the alternate audio channel.
In the Tools section of the menu is the upgrade by USB application. From here you can upgrade the firmware- of course FTA still, load channel lists and also dump channel lists and dump K*yfiles to USB.
Specification:
1. Tuner & Channel <Digital Part>
Optional Antenna In/Loop-Through IEC connector Female, Male
Input Frequency range 51MHz to 858MHz
Signal Level range -20 to 20 dBmV
RF Impedance 75 oHM
QAM Demodulation 64/128/256 QAM
Symbol Rate 1.725 to 6.952 Ms/s
2. System & Memory
Main Processor Ali 3329E
Flash Memory 2 Mbytes
System Memory 16 Mbytes SDRAM
3. MPEG Transport Stream & A/V Decoding <Digital Part>
Transport Stream MPEG-2 ISO/IEC 13818 Transport Stream Specification
Profile Level MPEG-2 MP@ML, MP@HL
Aspect Ratio 4:3, 16:9
Frame Rate 25H for PAL
Teletext Through VBI
Audio Decoding MPEG Layer I & II
Audio Mode Single channel/Dual channel/Joint stereo/Stereo
Sampling Rate 32, 44.1, 48kHz
4. A/V & Date In/Out (Each In/Out optional)
TV SCART Output: RGB, CVBS, Audio L/R with Volume control
VCR SCART Output: CVBS, Audio L/R
Input: RGB, CVBS, Audio L/R
SPDIF Output: Digital Audio OPTICAL
USB SIDE X 1
USB 2.0 HOST Connector: USB A TYPE
Current Consumption: Max. 500mA
Data Interface RS-232, Bit Rate: 115,200baud
Connector: 9-pin D-sub male
Comment