ex700 scrambled channels how to flash properly ?

[interat]

I put bin file onto pen, from computer, put it in the box, turned off and on again, re tuned stations and only getting fta did i do something wrong ? all other stations showing scrambled, I'm new to the forum, thanks.

[badapple]

Hi m8, when you updated the box, did it say so on the lcd.
did you rename the file to flash.tbn before downloading?

Follow these easy instructions to update your EX7000HD box

Flashing The EX7000HD using USB pen

1. Download the required firmware(latest in downloads section)

2. Copy it to your usb pen or equivalent, ensure file name is FLASH.TBN

3. Switch box off, insert USB pen into the usb slot and switch power on at the rear switch.

3. box will reboot, open the flash file extract it to its memory and install it automatically.
You should see writing and countdown on lcd screen of box.

4. Once flashed, select your desired settings, scan using the correct SY(your provider) leave it on S*Y Sports 1 for a few minutes for the channels to update...then enjoy
__________________

[chic.]

Hi m8, when you updated the box, did it say so on the lcd.
did you rename the file to flash.tbn before downloading?

Follow these easy instructions to update your EX7000HD box

Flashing The EX7000HD using USB pen

1. Download the required firmware(latest in downloads section)

2. Copy it to your usb pen or equivalent, ensure file name is FLASH.TBN

3. Switch box off, insert USB pen into the usb slot and switch power on at the rear switch.

3. box will reboot, open the flash file extract it to its memory and install it automatically.
You should see writing and countdown on lcd screen of box.

4. Once flashed, select your desired settings, scan using the correct SY(your provider) leave it on S*Y Sports 1 for a few minutes for the channels to update...then enjoy
__________________

good answer m8 should make this a sticky i have had to post the same umpteen times

[interat]

That was a fast reply thanks, did re name the file but the box did re boot, how do you open the flash file ? and extract it to its memeory, thanks.

[chic.]

That was a fast reply thanks, did re name the file but the box did re boot, how do you open the flash file ? and extract it to its memeory, thanks.

when you have downloaded the firmware double click it , then right click the flash and rename the flash not the file

[satsmo]

good answer m8 should make this a sticky i have had to post the same umpteen times

It was put into the sticky when it was introduced to the market http://www.digital-kaos.co.uk/forums...firmware-9787/

[badapple]

It was put into the sticky when it was introduced to the market http://www.digital-kaos.co.uk/forums...firmware-9787/

Yea m8, all the info is available but peeps just dont want to do any homework.