Eurovox setup

[acampbell933]

Just bought a eurovox 1100 USB but am struggling to find which cables are needed to install it. I have virgin media broadband and I bought a 2 way f splitter but at present there is an attentuator on the cable box and i cant fit the splitter unless I take it off. Is this wise?

Also could anyone link me to a diagram or anything like that showing the manual setup of the cables? Sorry to sound like a complete newbie but havent did anything like this before.

Andrew

[chic.]

Hi welcome to the forum read this http://www.digital-kaos.co.uk/forums...-eurovox-9786/ and remove the attentuator

[acampbell933]

I have my box already flashed, ive just been having problems buying the right cables and things to connect the box to the virgin media broadband point.

Thanks for trying though

Andrew

[chic.]

I have my box already flashed, ive just been having problems buying the right cables and things to connect the box to the virgin media broadband point.

Thanks for trying though

Andrew

sorry for the misundrestanding i use ordinary coaxial and 2 f plugs you can get them from any good diy shop

[woonker]

you'll need coaxial cable and a 2 way cable splitter and 4 F plugs, and then you get the wire that normaly goes in to the back of your modem and you plug that in to the 2 way splitter and then you get a piece of coaxial cable and add F plugs at both ends and you attach 1 end to the cable splitter and the other end in to the back of your modem and then you get another coaxial cable wire and do the same but this time connect 1 of the ends to the splitter and you get the other end and an F addapter to the F plug and plug it in your eurovox or whatever cable box your using.


hope this helps you out