Eurovox EX7000 HD+ (Blank Screen)

[Mondax16]

Hi All, Please can you help

I flash software EX7000HDPlus_21092009.tbn (EX7000 Sept21st Beta Firmware) with my USB pen on to the Eurovox EX7000 HD+.

All that happens now is when you switch it on it says "pppppppppppppppp" "Now booting..." on the display screen and then nothing.

Nothing on the TV and nothing on the Eurovox EX7000 HD+ display screen.

Looks like i've installed the wrong software!

How can I get this box up and running again??

Hopefully some will able to help

Many Thanks
Mondax

[chic.]

try reflashing with this Digital Kaos - Downloads - Eurovox EX7000HD 8-1-09 Firmware

[minge]

Help needed......i cannot get my ex7000 to work. Yes i have insatted flash, and when the biox is turned back on, it says flash.tbn on the display. i have then scanned and in the channel section (list of channels) it says ' non standard se fraud'!!!!!!
anyone have any advice??? I have spent over 5 hrs trying this!

Any help much appreciated....

Cheers...

[Hob]

Digital Kaos - Downloads - *NEW* EX7000HD Firmware 12/03/09


First do a factoty reset
Remove the september firmware off your pen.
Download the above firmware and put onto your pen.
Unzip it and rename flash.tbn
Turn box off insert pen then turn box back on.
It will now copy file and reboot automatically.
Scan

[tubs]

once you have flashed box you must put the emu on and then go to sky sports1 and wait a few min to update and you be fine get back if you have no luck tubs

[Hob]

Chic most/all channels were lost on the 08.01 firmware hence the march update.

[chic.]

Chic most/all channels were lost on the 08.01 firmware hence the march update.

woops didnt know that but i think he will have to put the earlier 1 on or the box would say already installed

[minge]

Digital Kaos - Downloads - *NEW* EX7000HD Firmware 12/03/09


First do a factoty reset
Remove the september firmware off your pen.
Download the above firmware and put onto your pen.
Unzip it and rename flash.tbn
Turn box off insert pen then turn box back on.
It will now copy file and reboot automatically.
Scan

Cheers Hob, will try now but that is what i have doing for the last 5 hours....the box must have copied the tbn file as it came up on the screen, then i scanned, all the channels came up but when i opened them it just said ' scrambled' across the screen...
i am not the paitent of persons anyway (hoppin' mad)

right will try now....

[minge]

once you have flashed box you must put the emu on and then go to sky sports1 and wait a few min to update and you be fine get back if you have no luck tubs

Emu....??????????

[minge]

Digital Kaos - Downloads - *NEW* EX7000HD Firmware 12/03/09


First do a factoty reset
Remove the september firmware off your pen.
Download the above firmware and put onto your pen.
Unzip it and rename flash.tbn
Turn box off insert pen then turn box back on.
It will now copy file and reboot automatically.
Scan

Just done that Hob and still 'some' channels are scrambled and it sticks between changing channels....what is going on..??? anybody else had this many problems???

[beersy]

Hi All, Please can you help

I flash software EX7000HDPlus_21092009.tbn (EX7000 Sept21st Beta Firmware) with my USB pen on to the Eurovox EX7000 HD+.

All that happens now is when you switch it on it says "pppppppppppppppp" "Now booting..." on the display screen and then nothing.

Nothing on the TV and nothing on the Eurovox EX7000 HD+ display screen.

Looks like i've installed the wrong software!

How can I get this box up and running again??

Hopefully some will able to help

Many Thanks
Mondax

you need 2 rename the file flash.tbn first do a factory reset