Eurovox Max blue is displaying 1803 and not working

[Trojanboi]

my eurovox max blue is not working and the display is constantly stuck on 1803, any help would be much appreciated, thanks.

[stewthehibee]

Try flashing it and when you start flashing it unplug from mains for a second and power back up leave the flash running it may work. Then try doing a scan for channels!! Hope it works.

[Trojanboi]

thanks 4 your post, i tried what u said but still no joy, any other ideas

[camelv]

thanks 4 your post, i tried what u said but still no joy, any other ideas

it may have blown the c14 cap on the board inside m8
Digital Kaos - Downloads - c14 capacitor replacement

[smoggy]

it looks like you have lost the scart output

disconnect your scart
connect some coax cable from the TV / VCR socket of the eurovox to the TV
tune your telly to the VCR channel where you will get the 'enter pin' screen
using your remote enter the master pin which is 1004.
go to menu and clear data, then do a factory reset.
plug your scart back in and do a powerscan as normal or reflash the box with the clonesafe firmware

[Trojanboi]

thanks 4 your posts but i`ve given up and purchased a starview 5