Setup problems with my Eurovox EX5100 PVR

[mickp67]

Hi,

I just got my box delivered today and followed the instructions to 'flash' it using the null modem cable. That seemed to have worked fine and I then began the installation process via my TV. I got as far as to scan for channels but it has been scanning for about 2 hours now so not sure if I've done something wrong or not.

I have a User Installation on my TV screen and there is a bar with the title 'Quality' going up and down in red.

Anybody got any ideas as to what I've done wrong?

[marshallar]

you are still in the stage prior to the actual scanning

[chic.]

do a deep scan not User Installation using the symbol rate for your area

[mickyboy]

try this m8 http://www.digital-kaos.co.uk/forums...settings-9789/

[mickp67]

Cheers Mickeyboy, that worked a treat!

I can't find channel 5, any channels I find have audio over them. Also I can't find the radio channels. Any ideas?

[mickyboy]

try the remote should be a button on it m8 says radio at the top of the remote ,just do a channel update m8 go to menu/channel manager /user instalition /n press the update button (red),,,regards micky

[chic.]

Hi m8 for audio press the red btn and choose another option (english)

[mickp67]

Nice one m8. I've also got eurovox maxv, can I flash this with the same software I used for the EX5100?

[mickyboy]

naw m8 have a look here http://www.digital-kaos.co.uk/forums...firmware-9787/