eurovox ex5000 pvr

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • plumber50
    Newbie
    • Jul 2008
    • 5

    #1

    eurovox ex5000 pvr

    hi i am a new member,

    would like so help before i buy the eurovox ex5000 pvr. how easy is it to install the software, for cable tv (virgin).
  • Devilfish
    Administrator
    • Feb 2008
    • 7872

    #2
    You'll need a null modem cable and a PC or laptop with a com port (or get a usb to serial adapter).

    You can get the firmware here...

    Digital Kaos - Downloads - eurovox pvr ex5000_v1.1_2exe (12/07/08)

    Connect the eurovox to your PC using the null modem cable, run the .exe file, hit download and it will flash the new firmware to the box.

    Do a scan when it reboots and that should be you.

    Comment

    • plumber50
      Newbie
      • Jul 2008
      • 5

      #3
      many thank devilfish, hopefully will order the eurovox tomorrow, and will find out then how i get on.

      Comment

      • sianmika
        Newbie
        • Jul 2008
        • 1

        #4
        Hi

        y is this site so hard to download? off thanks

        <--sianmika added 3 Minutes and 15 Seconds later...-->

        how do i download that link? plz help
        Last edited by sianmika; 16 July, 2008, 20:32. Reason: Automerged Doublepost

        Comment

        • mo.p
          DK Veteran
          • Jun 2008
          • 298

          #5
          Originally posted by sianmika
          y is this site so hard to download? off thanks

          <--sianmika added 3 Minutes and 15 Seconds later...-->

          how do i download that link? plz help
          hi m8 i think u got to have 5 or 6 posts

          Comment

          • thesoulpoet
            Newbie
            • Jul 2008
            • 4

            #6
            cool, thanks im a newbie

            Comment

            • squirreluk
              Junior Member
              • Aug 2008
              • 30

              #7
              when flashing with 1.1a can you tell me if the cable lead should be connected to the box or not. Sorry if this sounds like an obviouse question but im new to Eurovox's.

              Comment

              • laumar
                Newbie
                • Aug 2008
                • 2

                #8
                dreambox

                help... ftp to drambox... nothing works

                Comment

                • jaytag
                  Member
                  • Jul 2008
                  • 82

                  #9
                  as in vm cable does not need to be connected .virgin media cable only nedds to be connected when scanning for channels

                  Comment

                  • squirreluk
                    Junior Member
                    • Aug 2008
                    • 30

                    #10
                    Thanks for the advice Jtag

                    Comment

                    • eurovoox123
                      Newbie
                      • Aug 2008
                      • 2

                      #11
                      eurovox ex5000 pvr

                      Does anyone have the link to the new firmware?

                      Comment

                      • squirreluk
                        Junior Member
                        • Aug 2008
                        • 30

                        #12
                        its in the download section Look for ufl1.1a

                        Comment

                        • marvo
                          Top Poster
                          • Jun 2008
                          • 157

                          #13
                          I leave everything in ,,scart, null, coaxial,, and just pull the (plug ac240v)after putiing in standby. Then if i have any problems ,,I do a factory reset reinstall the firmware,,then download favs etc.

                          Comment

                          • scouserjm
                            Newbie
                            • Sep 2008
                            • 2

                            #14
                            i have followed the instructions and it says no channels pls help

                            Comment

                            • mickqc
                              Junior Member
                              • Sep 2008
                              • 27

                              #15
                              does new ex5000 need flashing

                              if i buy a new ex5000 pvr would it need flashing or updating to view vm channels
                              or would it depend where i bought it from?
                              cheers

                              Comment

                              Working...